BackupPC-users
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [BackupPC-users] need help with windows backup

2013-02-28 16:36:41
Subject: Re: [BackupPC-users] need help with windows backup
From: upen <upendra.gandhi AT gmail DOT com>
To: Kris Lou <klou AT themusiclink DOT net>
Date: Thu, 28 Feb 2013 13:17:58 -0600 
Thanks.

On Thu, Feb 28, 2013 at 1:02 PM, Kris Lou <klou AT themusiclink DOT net> wrote:
> How far have you traced the script execution chain?  You should see winexe
> do call the appropriate scripts on the server side, and then a number of
> scripts also executing on the client side.
>
>>>/tmp/backuppc/preusercmd.sh: line 13: at: command not found
> Also, I specify the full path to "at"  for this.

I will try the full path now. However, I did su - backuppc account on
backup server and noted 'at' was in the path. I will give the full
path a try now.

>
>>>Error connecting to module C at a.b.c.d:873: auth failed on module C
> Check your auth.sh, and your rsyncd.conf/rsync.secrets on the client side?

Actually, auth.sh and rsyncd.conf/rsync.secrets was configured
correctly. I went over that again and again. User mentioned in
rsyncd.conf was configured in rsync.secrets in user:pw format.  I must
mention, the windows client installer,  though it asked for
username/password, installer didn't put anything in rsync.secrets and
rsyncd.conf which I realized some time after installation(but before
posting here) and winxp was rebooted after those files were modified.

What made the dump working for me was below two additional settings,
$Conf{RsyncdPasswd} = 'Ba....';
$Conf{RsyncdUserName} = 'backuppc';

backuppc is the user I have in rsynced.conf/rsync.secrets/auth.sh and
in windowsxp's backup configuration file (.pl) where the above two
parameters are configured.

I didn't see any mention of this step on the blog. I hope the two
parameters configured above are part of the process. If not then
something isn't working the way it should.


> On Thu, Feb 28, 2013 at 7:53 AM, upen <upendra.gandhi AT gmail DOT com> wrote:
>>
>> Hi,
>>
>> I have been trying to configure my winxp box to use the method from
>> http://www.michaelstowe.com/backuppc/
>>
>> I emailed the blog owner but it's possible they are busy so haven't
>> heard from them. Any help is appreciated.
>>
>> Here is the dump tried from command prompt.
>>
>> BackupPC_dump -v -f a.b.c.d
>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.367 ms
>>
>> --- a.b.c.d ping statistics ---
>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
>> rtt min/avg/max/mdev = 0.367/0.367/0.367/0.000 ms
>> Previous state preserved: ON
>>
>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.353 ms
>>
>> --- a.b.c.d ping statistics ---
>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
>> rtt min/avg/max/mdev = 0.353/0.353/0.353/0.000 ms
>> Previous state preserved: ON
>>
>> CheckHostAlive: returning 0.353
>> Executing DumpPreUserCmd: /tmp/backuppc/preusercmd.sh a.b.c.d
>> cmdSystemOrEval: about to system /tmp/backuppc/preusercmd.sh a.b.c.d
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Microsoft (R) Windows Script Host Version 5.7
>> Copyright (C) Microsoft Corporation. All rights reserved.
>>
>>
>> /tmp/backuppc/preusercmd.sh: line 13: at: command not found
>> cmdSystemOrEval: finished: got output Unknown parameter encountered:
>> "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Microsoft (R) Windows Script Host Version 5.7
>> Copyright (C) Microsoft Corporation. All rights reserved.
>>
>>
>> /tmp/backuppc/preusercmd.sh: line 13: at: command not found
>>
>> full backup started for directory C (baseline backup #3)
>> started full dump, share=C
>> Connected to a.b.c.d:873, remote version 30
>> Negotiated protocol version 28
>> Error connecting to module C at a.b.c.d:873: auth failed on module C
>> Executing DumpPostUserCmd: /tmp/backuppc/postusercmd.sh a.b.c.d 0
>> cmdSystemOrEval: about to system /tmp/backuppc/postusercmd.sh a.b.c.d 0
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Rsync and shadow copy unloaded
>> cmdSystemOrEval: finished: got output Unknown parameter encountered:
>> "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Unknown parameter encountered: "valid users"
>> Ignoring unknown parameter "valid users"
>> Unknown parameter encountered: "public"
>> Ignoring unknown parameter "public"
>> Unknown parameter encountered: "writable"
>> Ignoring unknown parameter "writable"
>> Rsync and shadow copy unloaded
>>
>> Got fatal error during xfer (auth failed on module C)
>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.376 ms
>>
>> --- a.b.c.d ping statistics ---
>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
>> rtt min/avg/max/mdev = 0.376/0.376/0.376/0.000 ms
>> Previous state preserved: ON
>>
>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d
>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d
>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data.
>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=2.75 ms
>>
>> --- a.b.c.d ping statistics ---
>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
>> rtt min/avg/max/mdev = 2.753/2.753/2.753/0.000 ms
>> Previous state preserved: ON
>>
>> CheckHostAlive: returning 2.753
>> Backup aborted (auth failed on module C)
>> Not saving this as a partial backup since it has fewer files than the
>> prior one (got 0 and 0 files versus 0)
>> dump failed: auth failed on module C
>>
>>
>> Thanks.
>>
>>
>> ------------------------------------------------------------------------------
>> Everyone hates slow websites. So do we.
>> Make your web apps faster with AppDynamics
>> Download AppDynamics Lite for free today:
>> http://p.sf.net/sfu/appdyn_d2d_feb
>> _______________________________________________
>> BackupPC-users mailing list
>> BackupPC-users AT lists.sourceforge DOT net
>> List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
>> Wiki:    http://backuppc.wiki.sourceforge.net
>> Project: http://backuppc.sourceforge.net/
>
>



-- 
upen,
emerge -uD life (Upgrade Life with dependencies)

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [BackupPC-users] multi platform backup system, stuckeyneila1982
Next by Date:  [BackupPC-users] BackupPC_link got error -4 when calling MakeFileLink, jdurand
Previous by Thread:  Re: [BackupPC-users] need help with windows backup, Kris Lou
Next by Thread:  Re: [BackupPC-users] need help with windows backup, upen
Indexes:  [Date] [Thread] [Top] [All Lists]