>-----Original Message-----
>From: Tyler J. Wagner [mailto:tyler AT tolaris DOT com]
>Sent: Wednesday, May 12, 2010 10:18 AM
>To: backuppc-users AT lists.sourceforge DOT net; sorin.srbu AT orgfarm.uu DOT 
>se
>Subject: Re: [BackupPC-users] [Solved] Slow web-GUI access
>
>On Wednesday 12 May 2010 09:02:48 Sorin Srbu wrote:
>> >However, there is another consideration. When your filesystem was 95%
>> > full, did
>> >you have some part of the filesystem reserved? When normally creating a
>> >filesystem, this is set at 5%, which means "95%" means "95% of the way
to
>> >hitting the reserved space".
>>
>> Not quite sure I follow here. The raid-array I created was set to be used
>>  by BPC only. I didn't reserve anything on these three drives, that I'm
>>  aware. However BPC is set to use $Conf{DfMaxUsagePct} = 95; as per
default
>>  setting. Is this what you mean?
>
>No, this has nothing to do with BackupPC.  This is something you set when
you
>create the filesystem (or use a GUI partitioner tool).  Usually there is a
>setting like "reserved blocks" which defaults to 5%.  You can also see it
with
>tune2fs:
>
># tune2fs -l /dev/sda3
>...
>Block count:              54193269
>Reserved block count:     541932
>
>So this filesystem has 1% of blocks reserved. This is why the percentage in
df
>does not add up:

Well , what do you know... 5% is reserved.

# tune2fs -l /dev/md0
[...]
Block count:              366287952
Reserved block count:     18314397

-- 
/Sorin

smime.p7s
Description: S/MIME cryptographic signature

------------------------------------------------------------------------------

_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/