On Tue, May 02, 2006 at 03:32:35PM +0200, Paul Bijnens wrote:
> On 2006-05-02 14:12, stan wrote:
> >I'm trying to get amrecover to default to my changer.
> >
> >I've added the following to my script that runs configure:
> >
> >--with-tape-device=chg-multi \
> >--with-changer-device=chg-multi \
> >
> >made distclean, id a make, and a make install. I'm working on the server
> >for the moment, so I rebooted it just to make certain that I had the
> >correct daemons running.
> >
> >But, still....
> >
> >
> >amrecover> extract
> >
> >Extracting files using tape drive /dev/nst0 on host
> >amanda.meadwestvaco.com.
> > ^^^^^^^^^^^^^^^^^^^^
> >The following tapes are needed: DailyDump21
> >
> >This is runnig amrecover withut any options. On 2.5.0 PL1 if it atters.
> >
> >Am I doing something wrong here?
>
>
> Moreover, whatever I try here to reproduce your problem, I can't.
> When the SERVER is version 2.5.0 the amrecover is tried with different
> values until one succeeds:
>
> 1. the device specified with amrecover -d ...
> 2. the device specified with amrecover "settape" command
> or what the index-server returns, which tries these values:
> 3. The amrecover_changer param in the amanda.conf on the server
> 4. the tpchanger parameter in amanda.conf of the server
> 5. the tapedev specified in amanda.conf of the server
>
> So where do you have /dev/nst0 in that list?
> Are you connecting with the correct "index-server"?
>
As you see from my previous message, the problem was caused
by my midconfiguration, and (in retrospect) was consitent with
the above defined beahvior.
Thanks, once more.
--
U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong
Terror
- New York Times 9/3/1967
|