Problem with Changer

Hello,

I have a Tandberg LTO2 Superloader attached on an Adaptec 39160D and the
chg-scsi returns: amtape: could not load slot Can't: read MTE status

Example:
$amtape CAPCom update
amtape: scanning all 16 slots in tape-changer rack:
slot 0: date 20031211 label CAPCom01
amtape: could not load slot Can't: read MTE status
$

The thing worked fine with a LSI Megaraid Controller, but I had to
change the host :(

The SCSI-Log look a bit confusing to me, because it dies in
SCSI_ReadElementStatus which it handled properly some requests before in
the log (possibly I'm looking worong, of course)

I'm running Linux with a 1.6.1 kernel, and amanda 2.4.4p2.

Any idea what's wrong?

Here some parts out of the log (it's about 21KB, too long to post I assume).

One of the parts where it seems to work:
SCSI_ExecuteCommand :  READ ELEMENT STATUS B8 11 00 00 00 02 00 00 00 70
00 00
1074271383:##### STOP DecodeSCSI
1074271383:SCSI_Run Exit 0
1074271384:SCSI_ReadElementStatus : (2) SCSI_Run 0
00 00 00 01 00 00 00 3C 01 80 00 34 00 00 00 34    ...........4...4
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00 00 00 00 01 01 09 00 00 00 00 00 00 00 00 00    ................
49 41 44 37 30 35 4C 31 20 20 20 20 20 20 20 20    IAD705L1........
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20    ................

1074271384:##### STOP SCSI_ReadElementStatus (0)


Part where the log ends:
[...]
##### START SenseHandler
Ident = [UHDL], function = [generic_changer]
##### START GenericSenseHandler
##### START DecodeSense
GenericSenseHandler : Sense Keys
        Extended Sense
        ASC                           4E
        ASCQ                          00
        Sense key                     0B
                Aborted Command
Sense2Action START : type(8), ignsense(0), sense(0B), asc(4E), ascq(00)
Sense2Action generic start :
Sense2Action generic END : match for generic   return -> -1/Nothing Found
##### STOP GenericSenseHandler
#### STOP SenseHandler
1074271388:SCSI_Run (TestUnitReady) SENSE_ABORT
1074271388:SCSI_ReadElementStatus : (2) SCSI_Run -1
##### START DecodeSense
SCSI_ReadElementStatus :Sense Keys
        Extended Sense
        ASC                           4E
        ASCQ                          00
        Sense key                     0B
                Aborted Command
1074271388:##### STOP SCSI_ReadElementStatus (-1)


--
Thomas Corell
CAPCom AG < http://www.capcom.de >
Rundeturmstr. 12, 64283 Darmstadt, Germany
Phone +49 6151 155 900, Fax +49 6151 155 909