On Tue, 20 May 2003 at 11:18am, Block, John wrote

> That is the problem. Both the drive and the robot are on SCSI ID 5. Can you
> give me a quick how-to or point me in the right direction?

Well, this is rather RedHat specific, but the question does come up often 
enough that I'll keep it on the list.

The canonical source is the kernel-howto at linuxdoc.org.  *But*, with 
RedHat, I like sticking to RPMs.  So:

 o Download the current kernel$VERSION.src.rpm from your favorite RedHat 
   mirror (e.g. kernel-2.4.20-13.7.src.rpm)

 o If you've never built from SRPMs before, create a file ~/.rpmmacros 
   with the following in it:

%_topdir /some/path/src/rpm

   where you /some/path is someplace you have write access.

 o In that directory, create 5 subdirs: BUILD, RPMS, SOURCES, SPECS, SRPMS

 o Now, 'rpm -ivh kernel-2.4.20-13.7.src.rpm'

 o cd /some/path/src/rpm, and edit the appropriate .spec file in SOURCES 
   (e.g. SOURCES/kernel-2.4.20-i686-smp.config), changing the line that 
   says:

# CONFIG_SCSI_MULTI_LUN is not set

   to

CONFIG_SCSI_MULTI_LUN=y

 o You may also want to change the sublevel, err, level in 
   SPECS/kernel-2.4.spec, to differentiate this from a stock kernel.

 o Build the kernel via:

rpmbuild --clean --rmsource --target=i686 SPECS/kernel-2.4.spec

 o When that's done, you should have the familiar binary RPM packages in 
   the RPMS/i386 and RPMS/i686 directories.  Upgrade as usual.

-- 
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University