Jean-Louis,

This display is 'normal' if I've unloaded the tape from the
drive into the jukebox.

# /usr/local/sbin/mtx -f /dev/scsi/changer/c6t4d0 unload

> Data Transfer Element 0:Empty

I see the same result from the jukebox/drive at c5t4d0
under the same circumstances.

What the drive is loaded I see that one of the slots in
the jukebox is empty. (here using jukebox # 1)

> /usr/local/sbin/mtx -f /dev/scsi/changer/c5t4d0 status
  Storage Changer /dev/scsi/changer/c5t4d0:1 Drives, 9 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 2 Loaded):VolumeTag = AF6392L1    
                    
      Storage Element 1:Full :VolumeTag=AF6393L1                        
      Storage Element 2:Empty:VolumeTag=                                
      Storage Element 3:Full :VolumeTag=AF6391L1                        
      Storage Element 4:Full :VolumeTag=AF6390L1                        
      Storage Element 5:Full :VolumeTag=AF6394L1                        
      Storage Element 6:Full :VolumeTag=AF6395L1                        
      Storage Element 7:Full :VolumeTag=AF6396L1                        
      Storage Element 8:Full :VolumeTag=AF6398L1                        
      Storage Element 9:Full :VolumeTag=AF6397L1                        


===========

> On Tue, Jan 28, 2003 at 02:07:27PM -0500, Brian Cuttler wrote:
> >          Stdout:
> >   Storage Changer /dev/scsi/changer/c6t4d0:1 Drives, 9 Slots ( 0 
> > Import/Export )
> > Data Transfer Element 0:Empty
>                        ^^^
> >       Storage Element 1:Full :VolumeTag=AF6385L1                        
> >       Storage Element 2:Full :VolumeTag=AF6386L1                        
> >       Storage Element 3:Full :VolumeTag=AF6387L1                        
> >       Storage Element 4:Full :VolumeTag=AF6388L1                        
> >       Storage Element 5:Full :VolumeTag=AF6389L1                        
> >       Storage Element 6:Full :VolumeTag=AF6399L1                        
> >       Storage Element 7:Full :VolumeTag=CLNI59L1                        
> >       Storage Element 8:Full :VolumeTag=CLNI58L1                        
> >       Storage Element 9:Full :VolumeTag=CLNI57L1                        
> > 13:58:23 Config info:
> >          firstslot = "1"
> >          lastslot = "9"
> >          cleanslot = "-1"
> >          cleancycle = "120"
> >          offline_before_unload = "0"
> >          unloadpause = "0"
> >          autoclean = "0"
> >          autocleancount = "99"
> >          havereader = "1"
> >          driveslot = "1"
> >          poll_drive_ready = "3"
> >          max_drive_wait = "120"
> > 13:58:23 Exit (2) -> <none> could not determine current slot
> 
> Your driveslot must be set to '0', that's the drive you want to use.
> 
> Jean-Louis
> -- 
> Jean-Louis Martineau             email: martineau AT IRO.UMontreal DOT CA 
> Departement IRO, Universite de Montreal
> C.P. 6128, Succ. CENTRE-VILLE    Tel: (514) 343-6111 ext. 3529
> Montreal, Canada, H3C 3J7        Fax: (514) 343-5834