On Tue, Jan 28, 2003 at 02:07:27PM -0500, Brian Cuttler wrote:
> 
> Solaris 8, Amanda 2.4.2p2 (plus /usr/local/libexec/chg-zd-mtx from 2.4.3)
> SUN StorEdge 9, 
> 
> /usr/local/sbin/mtx -f /dev/scsi/changer/c6t4d0 inquiry
> Product Type: Medium Changer
> Vendor ID: 'HP      '
> Product ID: 'C7145           '
> Revision: '233S'
> Attached Changer: No
> 
> Config works perfectly with drive /dev/rmt/1cn and changer
> /dev/scsi/changer/c5t4d0, now so with 0cn and c6t4d0.
> 
> I finally figured out the script was naming the output files based
> on the number of the drive, ie 0cn logs to changer.debug.drive0 and 
> 1cn has log file changer.debug.drive1.
> 

Maybe I'm not following.

status  changer drive   debug fild
 Good   c5t4d0   1cn     ...drive1
 Bad    c6t4d0   0cn     ...drive0
> 
> 
> > /usr/local/sbin/mtx -f /dev/scsi/changer/c6t4d0 status

That's the bad one.

>   Storage Changer /dev/scsi/changer/c6t4d0:1 Drives, 9 Slots ( 0 
> Import/Export )
> Data Transfer Element 0:Empty
>       Storage Element 1:Full :VolumeTag=AF6385L1                        
>       Storage Element 2:Full :VolumeTag=AF6386L1                        
>       Storage Element 3:Full :VolumeTag=AF6387L1                        
>       Storage Element 4:Full :VolumeTag=AF6388L1                        
>       Storage Element 5:Full :VolumeTag=AF6389L1                        
>       Storage Element 6:Full :VolumeTag=AF6399L1                        
>       Storage Element 7:Full :VolumeTag=CLNI59L1                        
>       Storage Element 8:Full :VolumeTag=CLNI58L1                        
>       Storage Element 9:Full :VolumeTag=CLNI57L1                        
> 
> # setenv DEBUG 1
> # /usr/local/libexec/chg-zd-mtx -info
> 
> > cat changer.debug.drive1

That's the good one.

>   Storage Changer /dev/scsi/changer/c6t4d0:1 Drives, 9 Slots ( 0 
> Import/Export )
> Data Transfer Element 0:Empty
>       Storage Element 1:Full :VolumeTag=AF6385L1                        
>       Storage Element 2:Full :VolumeTag=AF6386L1                        
>       Storage Element 3:Full :VolumeTag=AF6387L1                        
>       Storage Element 4:Full :VolumeTag=AF6388L1                        
>       Storage Element 5:Full :VolumeTag=AF6389L1                        
>       Storage Element 6:Full :VolumeTag=AF6399L1                        
>       Storage Element 7:Full :VolumeTag=CLNI59L1                        
>       Storage Element 8:Full :VolumeTag=CLNI58L1                        
>       Storage Element 9:Full :VolumeTag=CLNI57L1                        
> > cat changer.debug.drive1

That's the same file but the contents differ below

> 13:58:23 === Start Tue Jan 28 13:58:23 EST 2003 ===
> 13:58:23 Arg info:
>          $# = 1
>          $0 = "/usr/local/libexec/chg-zd-mtx"
>          $1 = "-info"
> 13:58:23 Running: mtx status
> 13:58:23 Exit code: 0
>          Stdout:
>   Storage Changer /dev/scsi/changer/c6t4d0:1 Drives, 9 Slots ( 0 
> Import/Export )
> Data Transfer Element 0:Empty
>       Storage Element 1:Full :VolumeTag=AF6385L1                        
>       Storage Element 2:Full :VolumeTag=AF6386L1                        
>       Storage Element 3:Full :VolumeTag=AF6387L1                        
>       Storage Element 4:Full :VolumeTag=AF6388L1                        
>       Storage Element 5:Full :VolumeTag=AF6389L1                        
>       Storage Element 6:Full :VolumeTag=AF6399L1                        
>       Storage Element 7:Full :VolumeTag=CLNI59L1                        
>       Storage Element 8:Full :VolumeTag=CLNI58L1                        
>       Storage Element 9:Full :VolumeTag=CLNI57L1                        
> 13:58:23 Config info:
>          firstslot = "1"
>          lastslot = "9"
>          cleanslot = "-1"
>          cleancycle = "120"
>          offline_before_unload = "0"
>          unloadpause = "0"
>          autoclean = "0"
>          autocleancount = "99"
>          havereader = "1"
>          driveslot = "1"
>          poll_drive_ready = "3"
>          max_drive_wait = "120"
> 13:58:23 Exit (2) -> <none> could not determine current slot

If you do an amtape to load the first slot does it fail also?

> 
>>> End of included message <<<

-- 
Jon H. LaBadie                  jon AT jgcomp DOT com
 JG Computing
 4455 Province Line Road        (609) 252-0159
 Princeton, NJ  08540-4322      (609) 683-7220 (fax)