It appears to me that the old backups are not being deleted as time goes
on.
Is this accurate for these agents.?
And if it is does anyone have a way to automate cleaning house on these old
files..?
Any help would be very appreciated.
David Beardsley
Sr. Technical Programmer
Winn Dixie Stores Inc.
WWW.WINNDIXIE.COM <http://WWW.WINNDIXIE.Com>
DavidBeardsley AT winn-dixie DOT com
"Good judgment comes from experience, and a lot of that comes from bad
judgment."
-----Original Message-----
From: Rupp Thomas (Illwerke)
[mailto:thomas.rupp AT ILLWERKE.CO DOT AT]
Sent: Friday, September 04, 1998 9:07 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: AW: node LOCALHOST
Hi Eric,
do I misinterpret the documentation? In "Using the UNIX
Backup-Archiv Clients", SH26-4075-01, page 127, Option
"nodename" I read:
"In the absence of a nodename entry in the client system
options file,
dsm.sys, or a
virtualnodename entry in the client user options file,
dsm.opt, or a
virtualnodename
specified on a command line, then the nodename is the name
returned by
the
hostname command."
If I enter the command hostname as user root I get "rs53".
It's not clear to me who sets the nodename to "LOCALHOST"?
Greetings from Austria
Thomas Rupp
> -----Urspr|ngliche Nachricht-----
> Von: Loon, E.J. van - SPLXM [SMTP:Eric-van.Loon AT KLM DOT
NL]
> Gesendet am: Freitag, 4. September 1998 12:10
> An: ADSM-L AT VM.MARIST DOT EDU
> Betreff: Re: node LOCALHOST
>
> Hi Thomas!
> In fact, everything is working like it should!
> If you do not specify a nodename for the client, the
default TCP/IP
> name
> will be used. It looks like you don't want that. In that
case you
> should
> overrule the nodename by adding the line NODENAME RS53 to
your DSM.SYS
> file.
> Kindest regards,
> Eric van Loon
>
> -----Original Message-----
> From: Rupp Thomas (Illwerke)
[mailto:thomas.rupp AT ILLWERKE.CO DOT AT]
> Sent: Friday, September 04, 1998 13:51
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: AW: node LOCALHOST
>
>
> Hi Eric,
> I think the problem is with a wrong resolution on the AIX
side.
> The AIX client is registered as RS53. The schedule is
started for
> node RS53. But I see the message for LOCALHOST.
> LOCALHOST is a reserved name for TCP/IP which specifies
the
> local machine itself.
> If you do a PING LOCALHOST you always get the address
127.0.0.1.
> I think AIX client does a wrong resolution of the
IP-adress or
> something
> similar. BTW the AIX machine is a SP2 with 2 thin and 2
wide nodes and
> HACMP.
> I'm a VM/VSE guy and therefor not very familiar with AIX.
> Kind regards
> Thomas Rupp
>
> > -----Urspr|ngliche Nachricht-----
> > Von: Loon, E.J. van - SPLXM
[SMTP:Eric-van.Loon AT KLM DOT NL]
> > Gesendet am: Freitag, 4. September 1998 10:52
> > An: ADSM-L AT VM.MARIST DOT EDU
> > Betreff: Re: node LOCALHOST
> >
> > Hi Thomas!
> > If you issue the Q NODE command through the admin
commandline
> > interface,
> > do you see the node LOCALHOST listed?
> > If not, you haven't registered the node at you server.
You can do
> this
> > by using the REGISTER NODE command.
> > Kindest regards,
> > Eric van Loon
> >
> > -----Original Message-----
> > From: Rupp Thomas (Illwerke)
[mailto:thomas.rupp AT ILLWERKE.CO DOT AT]
> > Sent: Friday, September 04, 1998 01:43
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: node LOCALHOST
> >
> >
> > Hi everybody,
> >
> > today I tried my first scheduled backup of an AIX node.
But I
> > always get the following messages.
> >
> > ANR0400I Session 30 started for node LOCALHOST (AIX).
> > ANR0422W Session 30 for node LOCALHOST (AIX) refused -
> > node name not registered.
> > ANR0403I Session 30 ended for node LOCALHOST (AIX).
> >
> > I'm running ADSM/VM V2.1 (server) and ADSM/AIX 3.1.03
> > (client).
> > If I enter the command HOSTNAME I get "RS53" as a
reply.
> > If I start the backup manually - no problems.
> >
> > Here's my DSM.SYS:
> >
> > SErvername ADSM
> > COMMmethod TCPip
> > TCPPort 1500
> > TCPCLIENTPORT 1500
> > TCPServeraddress ibmhost
> > COMMRESTARTduration 30
> > COMPRESSIon yes
> > INCLExcl /usr/lpp/adsm/bin/inclexcl.opt
> > PASSWORDAccess generate
> > PRESchedulecmd /usr/lpp/adsm/bin/precmd
> > POSTSchedulecmd /usr/lpp/adsm/bin/postcmd
> > SCHEDMODe prompted
> > TCPNodelay yes
> >
> > And here's my DSM.OPT:
> >
> > COMPRESSAlways no
> > DATEformat 4
> > DOMain all-local
> > LANGuage german
> > NUMberformat 5
> > SUbdir yes
> >
> > Has anyone seen such a problem?
> >
> > Kind regards
> > Thomas Rupp
> > Vorarlberger Illwerke AG
> > MAIL: thomas.rupp AT illwerke.co DOT at
> > TEL: ++43/5574/4991-251
> > FAX: ++43/5574/4991-820-8251
----------
=========================================================================
|