[Networker] EMC Networker / Celerra Data Mover - Can I share a TLU?
2008-12-09 04:08:38
> HI Dave.
> One other gotcha. make sure you have separate pools for NDMP and non-NDMP
> backups. It isn't supported to have both types of backups written to the
> same media unless it is through a normal networker storage node.
>
> From admin guide
>
> NDMP and non-NDMP save sets on a single volume are not supported, unless
> the data is backed up to a NetWorker storage node.
>
> Cheers!
> Brendan
Thanks brendan, yes we are using seperate pools for NDMP and non-NDMP. We
generally have a seperate pool for each group we backup and NDMP backups are in
a seperate group.
> If this is a celerra gateway model, I hope you didn't zone in the tape
> drives to be shared with the disk. Not a good idea. You should be using
> the aux ports on the datamovers. If not, please disregard.
>
> FYI.
Thanks Bruce, Yes it is a gateway model NS502G and we are using the aux0 port.
It's zoned on the switch using single initiator.
Thanks all again for your help on this one.
Dave.
+----------------------------------------------------------------------
|This was sent by d.m.hall AT dorsetcc.gov DOT uk via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|