Re: [Networker] Setting up a tape library on RH Linux via fibre
2007-07-19 18:22:36
> I am setting up a new Red Hat Linux ES 4 server with a Qualstar tape
> library.
What library?
> For testing, I just installed NetWorker 7.2.1 server, but it
> will be a storage node when it goes into production. Anyway, the
> library is connected to a Qlogic SANbox Express 1400 which has four
> fibre channel cables running to a Dell 2950 with three Qlogic HBA
> cards in it (although I am only using two of them now). After much
> puttering around, I can get "inquire -l" to see the four LTO-3 tape
> drives in this new library, but I am at a loss as to how to make the
> robot's information appear in the "inquire -l" output. When I try to
> use jbconfig, it can't find the tape library.
Do the cables go only to the drives, or does the library have a separate
interface that's used?
--
Darren Dunham ddunham AT taos DOT com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|