In regard to: Re: [Networker] Setting up a tape library on RH Linux via...:

After answering I took a look at the original question and your
problem is really that the devices show up as Type: Processor, not
Type: Tape and Type: Autochanger.
jbconfig only looks for Autochangers.

Dag's on to the real problem.  Your bridge is obscuring the actual device
types.  There's hopefully some kind of configuration guide with the
bridge/router that tells you how that can be fixed.  It should be some
kind of configuration setting on the bridge/router itself.

Tim
--
Tim Mooney                                        Tim.Mooney AT ndsu DOT edu
Information Technology Services                   (701) 231-1076 (Voice)
Room 242-J6, IACC Building                        (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER