Hmm, perhaps I'll call Sun now. I regret posting any entries to the list;
I offer the following explanations though:
I had a several Quantum engineers confirm the entires.
I had Sun support confirm the entries..
I agree and do not doubt that the support is there already in the st driver
(according to the rev notes).
However, having no entries in the st.conf tends to confuse both Quantum
and Legato tech support when calling in a problem.
Sun should update/fix their st.conf file with these patch revs. While
its says DLT7000's are supported, it does not mention, LTO or SDLT.
Further, even for Quantum DLT7000, it does not have Note1 which
says that no entry is needed.
I apologize for confusing anyone on the list..
Robert Maiello
Thomon Medical Economics
-----Original Message-----
From: Scott Howard [mailto:scott AT doc.net DOT au]
Sent: Friday, August 09, 2002 9:40 AM
To: Legato NetWorker discussion; Maiello, Robert
Subject: Re: [Networker] strange tape writing stats
On Thu, Aug 08, 2002 at 11:49:47AM -0400, Maiello, Robert wrote:
> Make sure you have the correct quantum line in your st.conf? I'm using:
>
> ##### DLT7000s and SDLT support #########
> DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
Do _NOT_ put entries in st.conf for DLT7k's unless you have a specific
reason for doing so. Solaris (any version, as long as it's been patched
in the past few years) has native support for DLT7000 - there's no need
to put an entry in st.conf, and doing so can lead to sub-optimal
performance.
> SDLT1 = 1,0x38,0,0x19639,4,0x90,0x91,0x90,0x91,3;
Same story as above for SDLT, only you'll need to make sure you've got
a recent st patch applied (eg, 108725-08 or later for Solaris 8, 107460-11
or later for Solaris 7).
> Umm, of course, I forgot LTO was called out here, not SDLT.
Same story again. LTO support was added in 108725-07 (Sol8), 107460-10
(Sol7), etc.
Scott.
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service.
________________________________________________________________________
________________________________________________________________________
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
The information contained in this communication may be confidential or legally
privileged and is intended only for the recipient named above. If the reader of
this message is not the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication or its contents is
strictly prohibited. If you have received this communication in error, please
immediately advise the sender and delete the original and any copies from your
computer system.
|