On Thu, 8 Aug 2002 03:51:26 -0400, Howard Martin <howard.martin AT EDS DOT COM>
wrote:

>I've hit the same problem.
>NetWorker 6.1.1.Build.238 Enerprise Edition
>SunOS 5.7 E450
>DLT7000 and IBM LTO
>I find the nwadmin GUI under reports speeds by around 25% , the response
>from our Legato support company was that this was due to networker not
>polling the drives frequently, to increase the polling rate and improve
>accuracy was considered unlikely to be a high priority for Legato but I'm
>going to ask that a RFE is rasied for it.
>
>
>On Wed, 7 Aug 2002 13:26:07 -0400, Paul T. DAY <day AT DEAS.HARVARD DOT EDU>
wrote:
>
>>        When I look in nwadmin/nsrwatch, I see writing at about 4.5 meg/hr
>>yet when I do an iostat I see it writing/reading at just over 6 megs/hr.
>>Is this normal.  I also don't seem to be getting much compresion most of
>>the time.  Any ideas.
>>
>>NetWorker 6.1.1.Build.238 Power/110
>>SunOS nsrhost 5.8 Generic_108528-05 sun4u sparc SUNW,Ultra-80
>>Qualstar library with 7 AIT-2 drives
>>
>>Paul
>>
>>--
>>Note: To sign off this list, send a "signoff" command via email
>>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>>http://listmail.temple.edu/archives/networker.html where you can
>>also view and post messages to the list.
>>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=