Good luck. This has never worked for us. Very rarely do we get a full
system restore of windows and have it boot just fine.
 


Greg 


________________________________

From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Shyam
Hazari
Sent: Monday, July 10, 2006 8:48 AM
To: WEAVER, Simon
Cc: veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Windows OS restore


I did the restore as per the DR document. Now the host is continuously
rebooting. I found the following technote, Will give it a shot.
 
http://seer.support.veritas.com/docs/251163.htm
 
Thanx
 
-Shyam

 
On 7/10/06, WEAVER, Simon <simon.weaver at astrium.eads.net> wrote: 

        Shyam
        It should be covered in the disaster recovery document....
         
        But as long as you have a bare OS and the NetBackup client is
installed and the client has been configured as before, you should be
able to perform a FULL RESTORE from a last known backup tape. 
         
        The Restore can be carried out on the client, or the MASTER
SERVER that usually performs the backup for this client.
         
        Come back to the list if we can assist
         
         

        Regards

        Simon Weaver
        3rd Line Technical Support 
        Windows Domain Administrator 

        EADS Astrium Limited, B32AA IM (DCS)
        Anchorage Road, Portsmouth, PO3 5PU 

        Email: Simon.Weaver at Astrium-eads.net
<mailto:Simon.Weaver at Astrium-eads.net> 

        

                -----Original Message-----
                From: Shyam Hazari [mailto: shazari at gmail.com
<mailto:shazari at gmail.com> ] 
                Sent: 10 July 2006 13:17
                To: veritas-bu at mailman.eng.auburn.edu 
                Subject: [Veritas-bu] Windows OS restore
                
                
                 
                One of our Windows system crashed during patch install.
It has been rebuilt now. I need to restore the OS from tape. I am
looking for a procedure. Is there a technote or a procedure I can follow
?
                 
                Much appreciated.
                 
                TIA
                 
                -Shyam

This email is for the intended addressee only.
If you have received it in error then you must not use, retain,
disseminate or otherwise deal with it.
Please notify the sender by return email. 
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.

EADS Astrium Limited, Registered in England and Wales No. 2449259 
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
        


>>> This e-mail and any attachments are confidential, may contain legal, 
>>> professional or other privileged information, and are intended solely for 
>>> the addressee.  If you are not the intended recipient, do not use the 
>>> information in this e-mail in any way, delete this e-mail and notify the 
>>> sender. CEG-IP1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060710/93adb842/attachment-0001.html