Networker

Re: [Networker] Barcode suffixes on STK SL500 tape library?

2007-09-11 07:24:17
Subject: Re: [Networker] Barcode suffixes on STK SL500 tape library?
From: Attila Mester <Attila.Mester AT SUN DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 11 Sep 2007 13:19:45 +0200
I have asked our library experts about this behaviour of the SL500. The answer was, the requested cartridge suffix barcode reporting feature is definitely implemented in the library control but needs to be enabled by the technician. You should ask for when the tech is on site again.
regards  -attila

********************************************************************
Attila Mester                           5 Digit Sun internal: x62534
Data Protection Architect                  Tel: (+49 89) 46 008 2534
Sun Microsystems GmbH                      Fax: (+49 89) 46 008 2583
Sonnenallee 1                                Mobil: +49 172 812 5947
85551 Heimstetten / Germany              mail: attila.mester AT sun DOT com
********************************************************************




Lee Roth wrote:
A few months ago I upgraded from a small 22-slot Qualstar tape library to
a Sun/StorageTek SL500 unit (http://tinyurl.com/3chghn) with 100 slots.
(The Qualstar TLS8222 was a darn good unit and ran trouble-free for
years).

When the Qualstar used to report the cartridge barcode label, it would
include the suffix characters, e.g. 000123L2 - "L2" means LTO2 cartridge,
or 000242L3 - "L3" means LTO3 cartridge.

The new SL500 reports no media type suffix - e.g. all I get is 000123 or
000242 on the above two cartridges.

Since this is a StorageTek device, technical info (via the web) on it is
darn scarce as compared to (usually) readily available technical info on
Sun gear. Likewise, I cannot configure hardly any of the
parameters/functions (e.g. SCSI IDs, LUNs, reserved slots for cleaning
tapes) on the SL500 myself... some tech has to come out with a laptop and
provision it. Being an old tech myself I'm not too keen about that aspect
of the unit; otherwise it has been performing well and I have no
complaints.

I do like the modular expandable feature of the SL500 so that I can add
drive+slot or slot-only expansion boxes until I fill the entire height of
a 19-inch rack.

Question: Does anyone know if there is a setting in the SL500 that will
cause the barcode to report the suffix characters from the LTO labels (L1,
L2, L3)? The tech claimed to know of no setting for this, but I'm not sure
I am buying that explanation.

Thanks!



--

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER