On Mon, 20 Jun 2011 12:11:21 -0400
"Kevin O'Connor" <kevin.oconnor AT arc90 DOT com> wrote:

> My setup is as follows:
> 
> Bacula Server (DIR, SD) -> Firewall/NAT -> Server to be backed up (FD)
> 
> The FD is accessible from anywhere, but the DIR/SD is not (NAT/FW).
> 
> When I start the backup, the Director connects to the FD without a
> problem, but then when the Director tells the FD to connect back to
> the SD it fails because of the NAT.  I'm in a situation where I can't
> get the ports forwarded, but it would seem that there should be a way
> to have the SD connect out to the FD or something along those lines
> to get this working. Is there a way to do that that I've missed in
> the docs or is really the only way to get this working is to expose
> the SD?

As crazy as this sounds have you though of setting up something like an
SSH tunnel? That could help bypass the NAT traversal issues. 

-- 
Craig Van Tassle
HUBzero.org
System Administrator
YONG 1006
Desk Phone : (765)496-6413

------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users