Hi folks.
In my configuration I have 2 files per client.
One file contains the storage definition (Archive Device)
and one file contains the directory directives.
I use one fileset definition named "SugarCRM_<xxxx>_Fileset" for
my three backup jobs SugarCRM_xxx_Full, SugarCRM_xxx_Diff
and SugarCRM_xxx_Incr where xxx is the name of the client.
When I start a Full Backup it will be terminated successfully.
When I start a Differential or Incremental backup immediate
following the Full backup then the Full backup won't be identified
and the Differential or Incremental Backup starts a Full backup again.
Does anyone know this problem?
br Robert
-----Original Message-----
From: John Drescher [mailto:drescherjm AT gmail DOT com]
Sent: Freitag, 13. Mai 2011 18:45
To: Robert Kromoser
Subject: Re: Next Week
I will try to look at this later today (its lunch time here in
Pittsburgh PA, USA) or maybe over the weekend. You should also post
this as a new question on the forum. There are other users there that
can help as well..
John
On Fri, May 13, 2011 at 12:36 PM, Robert Kromoser
<Robert.Kromoser AT kinamu DOT com> wrote:
> Hi John.
>
>
>
> I have another problem but you can check it next week.
>
> You already have my config files.
>
> When I run the job SugarCRM_CCRMTEST_Full and when it's done
>
> then I run the job SugarCRM_CCRMTEST_Diff or SugarCRM_CCRMTEST_Incr (just
> for testing it)
>
> then the followup Differential Job and the Incremental job don't know the
> Full Backup job ran before.
>
> This followup job alwas says:
>
>
>
> *list jobs
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> | JobId | Name | StartTime | Type | Level |
> JobFiles | JobBytes | JobStatus |
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F |
> 8,454 | 237,029,044 | T |
>
> | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F
> | 0 | 0 | R |
>
> | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F |
> 8,454 | 237,029,043 | E |
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> *
>
>
>
> *mess
>
> 13-May 19:30 CBCK0001-dir JobId 4: No prior Full backup Job record found.
>
> 13-May 19:30 CBCK0001-dir JobId 4: No prior or suitable Full backup found in
> catalog. Doing FULL backup.
>
> 13-May 19:30 CBCK0001-dir JobId 4: Start Backup JobId 4,
> Job=CCRMTEST_03_Backup_Incr.2011-05-13_19.30.43_11
>
> 13-May 19:30 CBCK0001-dir JobId 4: Created new Volume
> "Vol-CCRMTEST-Incr-0004" in catalog.
>
> 13-May 19:30 CBCK0001-dir JobId 4: Using Device "SugarCRM_CCRMTEST_Incr"
>
> 13-May 19:30 CBCK0001-sd JobId 4: Labeled new Volume
> "Vol-CCRMTEST-Incr-0004" on device "SugarCRM_CCRMTEST_Incr"
> (/tmp/backup/sugarcrm/CCRMTEST-fd/03_Incr).
>
> 13-May 19:30 CBCK0001-sd JobId 4: Wrote label to prelabeled Volume
> "Vol-CCRMTEST-Incr-0004" on device "SugarCRM_CCRMTEST_Incr"
> (/tmp/backup/sugarcrm/CCRMTEST-fd/03_Incr)
>
> 13-May 19:30 CBCK0001-dir JobId 4: Volume used once. Marking Volume
> "Vol-CCRMTEST-Incr-0004" as Used.
>
> *
>
> *list jobs
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> | JobId | Name | StartTime | Type | Level |
> JobFiles | JobBytes | JobStatus |
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F |
> 8,454 | 237,029,044 | T |
>
> | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F
> | 0 | 0 | R |
>
> | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F |
> 8,454 | 237,029,043 | E |
>
> | 4 | CCRMTEST_03_Backup_Incr | 2011-05-13 19:30:45 | B | F
> | 0 | 0 | R |
>
> +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+
>
> *
>
>
>
> I know that is another client but I have a template for the client
> configuration and so all my client
>
> Configurations are exactly the same except the Name, the IP-Address and the
> Path Inromation for
>
> the bsr files.
>
>
>
> *list jobs
>
> +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+
>
> | JobId | Name | StartTime | Type | Level |
> JobFiles | JobBytes | JobStatus |
>
> +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+
>
> | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F |
> 8,454 | 237,029,044 | T |
>
> | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F |
> 45,570 | 2,248,140,484 | E |
>
> | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F |
> 8,454 | 237,029,043 | E |
>
> | 4 | CCRMTEST_03_Backup_Incr | 2011-05-13 19:30:45 | B | F |
> 8,454 | 237,029,044 | T |
>
> +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+
>
> *
>
> As you can see there was startet the Full job first, then the Differentail
> job and at least the Incrmental
>
> Job and always was doing a fullbackup as you can see on the JobBytes and
> JobFiles.
>
> The error code here is just because the Scripts startet in Client Run After
> Job gives a wrong
>
> Return code so you can foget the JobStatus E here.
>
>
>
> Br Robert
>
>
--
John M. Drescher
------------------------------------------------------------------------------
Achieve unprecedented app performance and reliability
What every C/C++ and Fortran developer should know.
Learn how Intel has extended the reach of its next-generation tools
to help boost performance applications - inlcuding clusters.
http://p.sf.net/sfu/intel-dev2devmay
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
