Re: [Bacula-users] bacula mount request
2011-02-03 15:00:24
On Thu, Feb 3, 2011 at 2:52 PM, Jeremiah D. Jester
<jjest AT u.washington DOT edu> wrote:
> John,
>
> When I try to 'mount' the volume again to load the requested tape I get the
> following error: "3001 OK mount requested. Specified slot ignored.
> Device="Drive1" (/dev/nst0)". Then I get several messages in the console
> asking me to 'mount' the volume I just mounted (located in slot 12, volume
> 51L4). Here are the commands I'm issuing.
>
Can you try loading the tape using the autochanger front pannel. Then
update slots in bacula. Then mount in bacula. And see if that works.
If not try Alan's suggestion of mounting the wrong tape from bconsole.
John
------------------------------------------------------------------------------
The modern datacenter depends on network connectivity to access resources
and provide services. The best practices for maximizing a physical server's
connectivity to a physical network are well understood - see how these
rules translate into the virtual world?
http://p.sf.net/sfu/oracle-sfdevnlfb
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Bacula-users] bacula mount request, (continued)
- Re: [Bacula-users] bacula mount request, Jeremiah D. Jester
- Re: [Bacula-users] bacula mount request,
John Drescher <=
- Re: [Bacula-users] bacula mount request, Jeremiah D. Jester
- Re: [Bacula-users] bacula mount request, John Drescher
- Re: [Bacula-users] bacula mount request, John Drescher
- Re: [Bacula-users] bacula mount request, Alan Brown
- Re: [Bacula-users] bacula mount request, John Drescher
- Re: [Bacula-users] bacula mount request, Alan Brown
- Re: [Bacula-users] bacula mount request, John Drescher
Re: [Bacula-users] bacula mount request, Alan Brown
|
|
|