John Drescher wrote:
> On Wed, May 28, 2008 at 2:27 PM, Mark Nienberg <gmane AT tippingmar DOT com> 
> wrote:
>> Maria McKinley wrote:
>>
>>> So, the tape is in slot 9, bacula sees it in slot 9, loads slot 9, but
>>> then thinks it hasn't loaded it. Bacula had successfully loaded and used
>>> several tapes before this, the only unusual thing about this tape was
>>> that bacula had moved it from the Scratch pool.
>> This happens to me sometimes too, even when it is not a scratch tape.  If I 
>> use
>> bconsole to do a umount, followed by a mount, the tape will be recognized on 
>> the
>> second try and the backup will continue.
>>
> For me when the few times that has happened with my Exabyte Magnum224
> all that was needed was to issue a mount on the drive. And yes I do
> mean drive I have both drives and the autochanger defined in my
> bacula-dir.conf so all 3 show up as storage devices.

I've tried to issue a mount on the changer and that doesn't work (without a 
umount 
first).  I never thought of listing the drive too.  That is a good idea!
Mark


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users