Re: Dilog Libra 8 - experience anyone?
2007-01-23 19:54:35
Hello,
What happens when you run:
mtx -f /dev/sg2 status
Also run this and post output:
cat /proc/scsi/scsi
Pavel
Thanks
Stefan G. Weichinger schrieb:
I ebayed around a bit, and decided for a Dilog Libra 8 library
Currently I am waiting for this box to be delivered, so I still had no
possibility to try it out by myself.
It has been delivered today, after some fussing-around with a defect
power-supply it is running.
I followed the instructions in the chg-zd-mtx-script and set up the
conf-file accordingly.
Unfortunately, when it comes to testing the setup, and I try:
/usr/libexec/chg-zd-mtx -info
I get
<none> no slots available
(And a simple "2" after "echo $?" ...)
My conf for the changer:
---
firstslot=1
lastslot=8
driveslot=0
cleanslot=-1
autoclean=0
havereader=0
offline_before_unload=0
---
This is a host running Gentoo-Linux, up to date.
I compiled the kernel with LUN-support, and support for
SCSI-media-changer (/dev/sch? , /dev/ch? ) as well as for generic
SCSI-devices (/dev/sg?).
Currently I access the library via /dev/nst1 (another tapedrive attached
as st0) and /dev/sg2 (the changer). Things work ok when I execute
commands manually, but the chg-zd-mtx-script doesn't work as expected.
Thanks, greets, Stefan
|
|
|