On Thu, 12 Jun 2003 at 2:37pm, Tom Brown wrote

> > > amcheck-server: could not get changer info: badly formed result from
> > > changer: "cannot open SCSI device '/dev/sg4' - No such device or
> address"
> >
> > There *is* no sg4.  What in your config files points at sg4?
> 
> my changerdev in amanda.conf - if i set this to /dev/st0 i get

You need to set changerdev to the generic device which is the changer.  
It'll either be 2 or 3, depending on which of those LUNs is the tape drive 
and which is the changer.

-- 
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University