I am setting up a new Red Hat Linux ES 4 server with a Qualstar tape
library. For testing, I just installed NetWorker 7.2.1 server, but it
will be a storage node when it goes into production. Anyway, the
library is connected to a Qlogic SANbox Express 1400 which has four
fibre channel cables running to a Dell 2950 with three Qlogic HBA
cards in it (although I am only using two of them now). After much
puttering around, I can get "inquire -l" to see the four LTO-3 tape
drives in this new library, but I am at a loss as to how to make the
robot's information appear in the "inquire -l" output. When I try to
use jbconfig, it can't find the tape library.
I am sure I am missing some step, but I don't know what that step is.
Any suggestions will be appreciated. Here's what I have from the
"inquire -l" command:
$ /usr/sbin/inquire -l
-l flag found: searching all LUNs, which may take over 10 minutes per
adapter
for some fibre channel adapters. Please be patient.
[email protected]:DP BACKPLANE 1.05|(Unknown Device Type d), /
dev/sg0
ATNN:DP BACKPLANE000000
[email protected]:DELL PERC 5/i 1.03|Disk, /dev/sg1
S/N:
0054a1ad3ddb70b00d0091e8be909b01
WWNN:
60019B90BEE891000DB070DB3DADA154
[email protected]:DELL PERC 5/i 1.03|Disk, /dev/sg2
S/N:
00ae83b73cdb70b00d0091e8be909b01
WWNN:
60019B90BEE891000DB070DB3CB783AE
[email protected]:QualstarVFS212 T522|Processor, /dev/sg3
S/N: 100000501300301f0000
WWNN:
600501300000301F0000000000000000
PORT:00000001
[email protected]:QualstarVFS212 T522|Processor, /dev/sg4
S/N: 100000501300301f0000
WWNN:
600501300000301F0000000000000000
PORT:00000001
[email protected]:QualstarVFS212 T522|Processor, /dev/sg5
S/N: 100000501300301f0000
WWNN:
600501300000301F0000000000000000
PORT:00000001
[email protected]:QualstarVFS212 T522|Processor, /dev/sg6
S/N: 100000501300301f0000
WWNN:
600501300000301F0000000000000000
PORT:00000001
--
Stan Horwitz
Temple University
Enterprise Systems Group
stan AT temple DOT edu
CONFIDENTIALITY STATEMENT: The information contained in this e-mail,
including attachments, is the confidential information of, and/or is
the property of, Temple University. The information is intended for
use solely by the individual or entity named in the e-mail. If you
are not an intended recipient or you received this in error, then any
review, printing, copying, or distribution of any such information is
prohibited. Please notify the sender immediately by reply e-mail and
then delete this e-mail from your system.
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
