The easiest way to change the drives characteristics is to use the
jbedit command to delete the drive(s) and the add them back with the new
drive type.
As you are supposed to do that for all drives in your jukebox I doubt
that the jbedit procedure will be faster and safer than deleting the
jukebox and its drives and then reconfiguring them with the jbconfig
command.
Itzik

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Howard Martin
Sent: Tuesday, May 23, 2006 17:57
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Can't change media type to LTO3

On Mon, 22 May 2006 11:54:37 -0700, Darren Dunham <ddunham AT TAOS DOT COM>
wrote:


>> When I try to delete it from the jukebox's list, I get an error 
>> "Incorrect number of values in 'loaded volumes', should be '1'".  The

>> "loaded volumes" box is empty.
>
>It thinks a tape is loaded.  Can you eject the tape or is it confused 
>about the status?  If it's confused, you might want to reinitialize 
>elements with a 'nsrjb -HE'
>

Sorry but it not thinking a tape is loaded, you have to delete the
coresponding loaded volume slot - then if i remember correctly it will
repeat the complaint for loaded slots and possibly loaded barcodes and
also possibly the number of devices and drives.


>--
>Darren Dunham
ddunham AT taos DOT com
>Senior Technical Consultant         TAOS
http://www.taos.com/
>Got some Dr Pepper?                           San Francisco, CA bay
area
>         < This line left intentionally blank to confuse you. >
>

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER