Re: [Networker] sg driver versus Adaptec?
2004-01-12 19:30:30
In regard to: Re: [Networker] sg driver versus Adaptec?, George Sinclair...:
>Well, lsmod does show the aic7xxx module and looking under
>/proc/scsi/aix7xxx, I see files named 0 through 6.
Those are SCSI bus #s. That means that you have enough AIC controllers in
your server so that you are presenting 7 buses (scsi0 through scsi6) to
the OS via your Adaptec cards. You can do
cat /proc/scsi/scsi
to see what devices are on each bus. It's sort of a poor-man's "inquire".
> Each says it's
>version 6.2.8. Not sure how to check machine BIOS?
With an Intel box, you generally need to reboot and watch the console
for the BIOS messages.
Tim
--
Tim Mooney mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services (701) 231-1076 (Voice)
Room 242-J6, IACC Building (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|