Bacula-users

Re: [Bacula-users] Use multiple HDDs to backup files to

2015-06-02 13:37:19
Subject: Re: [Bacula-users] Use multiple HDDs to backup files to
From: Ana Emília M. Arruda <emiliaarruda AT gmail DOT com>
To: Bryn Hughes <linux AT nashira DOT ca>
Date: Tue, 2 Jun 2015 14:32:26 -0300
I particularly do not like the idea of having separate volumes of the same media type into two different mount points, but I know people that are configuring this way. So I decided to do some tests and see what really was happening. No issues. Instead I prefer the LVM solution.

On Tue, Jun 2, 2015 at 2:12 PM, Bryn Hughes <linux AT nashira DOT ca> wrote:
Do you have some specific reason to need to have these two volumes separate?

You might be best off using LVM to create a single logical drive. That
would certainly be a more flexible solution long term.

Bryn

On 2015-05-20 09:32 AM, SPQR wrote:
> I would like to set up bacula - well, my first steps have been successful.
>
> All my backups are written to /bacula/backup. But / has only 900GB. So I want bacula to write to /sdb1/bacula/backup, too. /sdb1 has another 950GB of space. The sum of available backup-space should be 1850GB HDD:
>
> Well, I got the following config of /etc/bacula/bacula-sd.conf:
>
>> Storage {                             # definition of myself
>>    Name = backup-sd
>>    SDPort = 9103                  # Director's port
>>    WorkingDirectory = "/var/lib/bacula"
>>    Pid Directory = "/var/run/bacula"
>>    Maximum Concurrent Jobs = 20
>>    SDAddress = backup.example.com
>> }
>>
>> Director {
>>    Name = backup-dir
>>    Password = "doyoureallywanttoknow"
>> }
>> Device {
>>    Name = FileStorage
>>    Media Type = File
>>    Archive Device = /bacula/backup
>>    LabelMedia = yes;                   # lets Bacula label unlabeled media
>>    Random Access = Yes;
>>    AutomaticMount = yes;               # when device opened, read it
>>    RemovableMedia = no;
>>    AlwaysOpen = no;
>> }
>>
> Okay - now I would like to add another device. I guess I could just add a second entry like this:
>
>> Device {
>>    Name = FileStorage
>>    Media Type = File
>>    Archive Device = /sdb1/bacula/backup
>>    LabelMedia = yes;                   # lets Bacula label unlabeled media
>>    Random Access = Yes;
>>    AutomaticMount = yes;               # when device opened, read it
>>    RemovableMedia = no;
>>    AlwaysOpen = no;
>> }
>>
> ?
>
> Do I have to change something else so that bacula is able to write more than 900GB - if the first 900GB are "full" it should switch to the second hdd.
>
>
> Thank you very much :-)
>
> +----------------------------------------------------------------------
> |This was sent by rlb AT ehrenwert DOT it via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users


------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users