|
On Saturday 18 October 2014 11:01:28 Ana Emília M. Arruda wrote:
> Just a comment here. Since you have "volume use duration = 7 days" and your
> volume was used until 12:58 next day, I'm quite sure (don't know how is
> your schedule configured) that this volume will be available (append) for
> use in the next week by your backup jobs. Because of your "volume use
> duration" configuration, Bacula started to use the same volume two weeks
> sequentially.
>
> 13-Oct 21:08 bl13-sd JobId 1761: Committing spooled data to Volume
> "000529L4". Despooling 7,153,238,703 bytes ...
> 14-Oct 12:58 bl13-sd JobId 1761: Despooling elapsed time = 00:01:06,
> Transfer rate = 108.3 M Bytes/second
> 14-Oct 12:58 bl13-sd JobId 1761: Elapsed time=15:55:43, Transfer rate=124.6
> K Bytes/second
> 14-Oct 12:58 bl13-sd JobId 1761: Alert: TapeAlert: OK
> 14-Oct 12:58 bl13-sd JobId 1761: Sending spooled attrs to the Director.
> Despooling 37,665 bytes ...
> 14-Oct 12:58 bl13-dir JobId 1761: Bacula bl13-dir 5.2.13 (19Jan13):
>
> Do you have prefer mounted volume set to yes?
>
> Regards,
> Ana
It didn't used the volume incorrectly recyled, 000529L4,
bacula storage daemon just recycled it, marked as used
and proceeded, correctly to backup on 000506L4 after
a manual intervention.
The manual intervention was required because the volume
000506L4 for some reason I don't quite understand was
not considered anymore inside the changer (it was of course),
as this log, from another concurrent job show
13-Oct 21:00 bl13-dir JobId 1762: Start Backup JobId 1762, Job=MccwHome.2014-10-13_21.00.00_34
13-Oct 21:01 bl13-dir JobId 1762: Using Device "lto1" to write.
13-Oct 21:01 bl13-dir JobId 1762: Sending Accurate information.
13-Oct 21:02 bl13-sd JobId 1762: No slot defined in catalog (slot=0) for Volume "000506L4" on "lto1" (/dev/nlto1).
13-Oct 21:02 bl13-sd JobId 1762: Cartridge change or "update slots" may be required.
13-Oct 21:02 bl13-sd JobId 1762: Warning: Director wanted Volume "000506L4".
Current Volume "000529L4" not acceptable because:
1998 Volume "000529L4" catalog status is Used, but should be Append, Purged or Recycle.
13-Oct 21:02 bl13-sd JobId 1762: 3307 Issuing autochanger "unload slot 4, drive 1" command.
13-Oct 21:03 bl13-sd JobId 1762: No slot defined in catalog (slot=0) for Volume "000506L4" on "lto1" (/dev/nlto1).
13-Oct 21:03 bl13-sd JobId 1762: Cartridge change or "update slots" may be required.
After the intervention, "update slots", the jobs continued without
any problem
14-Oct 12:58 bl13-sd JobId 1761: Despooling elapsed time = 00:01:06, Transfer rate = 108.3 M Bytes/second
14-Oct 12:58 bl13-sd JobId 1761: Elapsed time=15:55:43, Transfer rate=124.6 K Bytes/second
14-Oct 12:58 bl13-sd JobId 1761: Alert: TapeAlert: OK
14-Oct 12:58 bl13-sd JobId 1761: Sending spooled attrs to the Director. Despooling 37,665 bytes ...
14-Oct 12:58 bl13-dir JobId 1761: Bacula bl13-dir 5.2.13 (19Jan13):
14-Oct 12:56 bl13-sd JobId 1762: 3304 Issuing autochanger "load slot 9, drive 1" command.
14-Oct 12:56 bl13-sd JobId 1762: 3305 Autochanger "load slot 9, drive 1", status is OK.
14-Oct 12:56 bl13-sd JobId 1762: Recycled volume "000506L4" on device "lto1" (/dev/nlto1), all previous data lost.
And yes, I've "prefer mounted volume set to yes" for these jobs.
G. Vitillaro.
| 