Thanks for your reply, Nils. I will check this out.

Best regards,

João K.

Em 05-06-2012 03:29, Nils Juergens escreveu:
> Hey João,
>
> Am 01.06.2012 18:38, schrieb João Alberto Kuchnier:
>> It seems to be a tape misconfiguration but later, it shows a network
>> problem. Why the tape was marked full before getting to its capacity
>> limit? Is there another way to format these LTO-2 tapes?
> Try to fix your drive settings first. There is some good documentation
> in the Bacula Problem Resolution Guide:
>
> http://www.bacula.org/5.2.x-manuals/en/problems/problems/Testing_Your_Tape_Drive.html
>
> Use the btape test to check if your settings are ok.
>
> The Parts "Incorrect Number of Blocks or Positioning Errors" and
> "Ensuring that the Tape Modes Are Properly Set - Linux Only "might apply
> here, you may have check the correct settings on your tape block size.
>
>
> kind regards,
> Nils
>

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users