Ok. I thought It succeeded the first time I did it (don't have that output).
However, when I run 'label barcodes' again it appears to error out. Issued on
both drives, Drive 2 first, since Drive 1 is currently writing. Included output
for both below just in case.
Thanks again.
JJ
Label w/ Drive 2
==============
*label barcodes
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 1
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "ADIC_Scalar_24" has 23 slots.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot Volume
==============
2 KL0401
1 KL0307
3 KL0423
4 KL0412
5 KL0440
6 KL0443
7 KL0406
8 KL0444
9 KL0310
10 000091
11 000082
12 KL0445
13 KL0367
14 KL0385
15 KL0393
16 KL0429
17 KL0456
18 000112
19 000111
20 KL0330
Do you want to label these Volumes? (yes|no): yes
Defined Pools:
1: Onsite
2: Catalog
3: Offsite
4: Scratch
Select the Pool (1-4): 4
Media record for Slot 2 Volume "KL0401" already exists.
Media record for Slot 1 Volume "KL0307" already exists.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
Sending label command for Volume "KL0423" Slot 3 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 3, drive 1" command.
3992 Bad autochanger "load slot 3, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0423.
Sending label command for Volume "KL0412" Slot 4 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 4, drive 1" command.
3992 Bad autochanger "load slot 4, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0412.
Sending label command for Volume "KL0440" Slot 5 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 5, drive 1" command.
3992 Bad autochanger "load slot 5, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0440.
Sending label command for Volume "KL0443" Slot 6 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 6, drive 1" command.
3992 Bad autochanger "load slot 6, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0443.
Sending label command for Volume "KL0406" Slot 7 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 7, drive 1" command.
3992 Bad autochanger "load slot 7, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0406.
Sending label command for Volume "KL0444" Slot 8 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 8, drive 1" command.
3992 Bad autochanger "load slot 8, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0444.
Sending label command for Volume "KL0310" Slot 9 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 9, drive 1" command.
3992 Bad autochanger "load slot 9, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0310.
Sending label command for Volume "000091" Slot 10 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 10, drive 1" command.
3992 Bad autochanger "load slot 10, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume 000091.
Sending label command for Volume "000082" Slot 11 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 11, drive 1" command.
3992 Bad autochanger "load slot 11, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume 000082.
Sending label command for Volume "KL0445" Slot 12 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 12, drive 1" command.
3992 Bad autochanger "load slot 12, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0445.
Sending label command for Volume "KL0367" Slot 13 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 13, drive 1" command.
3992 Bad autochanger "load slot 13, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0367.
Sending label command for Volume "KL0385" Slot 14 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 14, drive 1" command.
3992 Bad autochanger "load slot 14, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0385.
Sending label command for Volume "KL0393" Slot 15 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 15, drive 1" command.
3992 Bad autochanger "load slot 15, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0393.
Sending label command for Volume "KL0429" Slot 16 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 16, drive 1" command.
3992 Bad autochanger "load slot 16, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0429.
Sending label command for Volume "KL0456" Slot 17 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 17, drive 1" command.
3992 Bad autochanger "load slot 17, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0456.
Sending label command for Volume "000112" Slot 18 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 18, drive 1" command.
3992 Bad autochanger "load slot 18, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume 000112.
Sending label command for Volume "000111" Slot 19 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 19, drive 1" command.
3992 Bad autochanger "load slot 19, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume 000111.
Sending label command for Volume "KL0330" Slot 20 ...
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 20, drive 1" command.
3992 Bad autochanger "load slot 20, drive 1": ERR=Child exited with code 1.
Results=Drive 1 Full (Storage Element 0 loaded)
Label command failed for Volume KL0330.
Label w/ Drive 1
=============
*label barcodes
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 0
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "ADIC_Scalar_24" has 23 slots.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot Volume
==============
2 KL0401
1 KL0307
3 KL0423
4 KL0412
5 KL0440
6 KL0443
7 KL0406
8 KL0444
9 KL0310
10 000091
11 000082
12 KL0445
13 KL0367
14 KL0385
15 KL0393
16 KL0429
17 KL0456
18 000112
19 000111
20 KL0330
Do you want to label these Volumes? (yes|no): yes
Defined Pools:
1: Onsite
2: Catalog
3: Offsite
4: Scratch
Select the Pool (1-4): 4
Media record for Slot 2 Volume "KL0401" already exists.
Media record for Slot 1 Volume "KL0307" already exists.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
Sending label command for Volume "KL0423" Slot 3 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0423.
Sending label command for Volume "KL0412" Slot 4 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0412.
Sending label command for Volume "KL0440" Slot 5 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0440.
Sending label command for Volume "KL0443" Slot 6 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0443.
Sending label command for Volume "KL0406" Slot 7 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0406.
Sending label command for Volume "KL0444" Slot 8 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0444.
Sending label command for Volume "KL0310" Slot 9 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0310.
Sending label command for Volume "000091" Slot 10 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume 000091.
Sending label command for Volume "000082" Slot 11 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume 000082.
Sending label command for Volume "KL0445" Slot 12 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0445.
Sending label command for Volume "KL0367" Slot 13 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0367.
Sending label command for Volume "KL0385" Slot 14 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0385.
Sending label command for Volume "KL0393" Slot 15 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0393.
Sending label command for Volume "KL0429" Slot 16 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0429.
Sending label command for Volume "KL0456" Slot 17 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0456.
Sending label command for Volume "000112" Slot 18 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume 000112.
Sending label command for Volume "000111" Slot 19 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume 000111.
Sending label command for Volume "KL0330" Slot 20 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0330.
-----Original Message-----
From: John Drescher [mailto:drescherjm AT gmail DOT com]
Sent: Tuesday, June 22, 2010 3:10 PM
To: Jeremiah D. Jester; bacula-users
Subject: Re: [Bacula-users] unload drive failing
On Tue, Jun 22, 2010 at 6:07 PM, Jeremiah D. Jester <jjest AT u.washington DOT
edu> wrote:
> Yes, correct. BTW, thanks for your help!
> JJ
>
Can you try the label barcodes again an post the entire output from start to
end.
Also we will soon have to pick this up tomorrow. Its 6:07 PM here and almost
time for me to go home..
John
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
