Re: [Bacula-users] labeling my volumes
2010-06-09 04:39:35
2010/6/8 Jeremiah D. Jester <jjest AT u.washington DOT edu>:
>
>
> I’ve just bacula is working state where it can connect to clients and the
> the required daemons. I’m now trying to prepare a volume to write too via
> bconsole. Is manual load usually required for bacula or is this a
> configuration issue?
>
>
>
> Thanks.
>
> JJ
>
>
>
> *label
>
> Automatically selected Catalog: MyCatalog
>
> Using Catalog "MyCatalog"
>
> The defined Storage resources are:
>
> 1: File
>
> 2: Tape
>
> Select Storage resource (1-2): 2
>
> Enter autochanger drive[0]:
>
> Enter new Volume name: Offsite-Vol1-6-8-10
>
> Enter slot (0 or Enter for none):
>
> Defined Pools:
>
> 1: Catalog
>
> 2: Offsite
>
> 3: Onsite
>
> 4: Scratch
>
> Select the Pool (1-4): 2
>
> Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
>
> Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ...
>
> Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0).
> Manual load may be required.
>
> 3301 Issuing autochanger "loaded? drive 0" command.
>
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
>
> 3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to open
> device "Drive1" (/dev/st0): ERR=No medium found
>
>
>
> Label command failed for Volume Offsite-Vol1-6-8-10.
>
> Do not forget to mount the drive!!!
>
> You have messages.
>
BTW, Does your changer have a barcode reader?
John
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|