Re: [Bacula-users] labeling my volumes
2010-06-09 04:27:13
>> I've just bacula is working state where it can connect to clients and
>> the the required daemons. I'm now trying to prepare a volume to write too
>> via bconsole. Is manual load usually required for bacula or is this a
>> configuration issue?
>>
>> Thanks.
>> JJ
>>
>> *label
>> Automatically selected Catalog: MyCatalog
>> Using Catalog "MyCatalog"
>> The defined Storage resources are:
>> 1: File
>> 2: Tape
>> Select Storage resource (1-2): 2
>> Enter autochanger drive[0]:
>> Enter new Volume name: Offsite-Vol1-6-8-10
>> Enter slot (0 or Enter for none):
>> Defined Pools:
>> 1: Catalog
>> 2: Offsite
>> 3: Onsite
>> 4: Scratch
>> Select the Pool (1-4): 2
>> Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103
>> ...
>> Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ...
>> Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0).
>> Manual load may be required.
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
>> 3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to
>> open device "Drive1" (/dev/st0): ERR=No medium found
>>
>> Label command failed for Volume Offsite-Vol1-6-8-10.
>> Do not forget to mount the drive!!!
>> You have messages.
>> *
>
> You probably forgot an 'update slots'. But more generally, make sure all
> of the btape tests work first (see tape testing section of the manual.
>
Other possible reasons that came into my mind:
- can uid used to run storage daemon access the tape changer device?
- tape device used with Bacula (in Linux?) is usually /dev/nst0, not
/dev/st0
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|