[Bacula-users] labeling my volumes

I’ve just bacula is working state where it can connect to clients and the the required daemons. I’m now trying to prepare a volume to write too via bconsole. Is manual load usually required for bacula or is this a configuration issue?

Thanks.

*label

Automatically selected Catalog: MyCatalog

Using Catalog "MyCatalog"

The defined Storage resources are:

1: File

2: Tape

Select Storage resource (1-2): 2

Enter autochanger drive[0]:

Enter new Volume name: Offsite-Vol1-6-8-10

Enter slot (0 or Enter for none):

Defined Pools:

1: Catalog

2: Offsite

3: Onsite

4: Scratch

Select the Pool (1-4): 2

Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...

Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ...

Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0). Manual load may be required.

3301 Issuing autochanger "loaded? drive 0" command.

3302 Autochanger "loaded? drive 0", result: nothing loaded.

3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to open device "Drive1" (/dev/st0): ERR=No medium found

Label command failed for Volume Offsite-Vol1-6-8-10.

Do not forget to mount the drive!!!

You have messages.

Jeremiah Jester

Senior Informatics Specialist

Microbiology, Katze Lab

Box 357242

P: 206-732-6185

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users