Hello,
26.11.2009 16:31, Juergen Koch wrote:
> I use a autochanger with bacula on debian/lenny.
> The changer has two drives and I can load tapes into the drives using
> the mtx-script:
>
> mtx-changer /dev/sg4 load 2 /dev/nst1 1
>
> But, the mount-command use only the default tape values:
>
> -----
> *mount
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> Automatically selected Storage: tl-01
> Connecting to Storage daemon tl-01 at bacula:9103 ...
>
> Enter autochanger drive[0]: 1 ---!!!!---
>
> Enter autochanger slot: 2
> 3307 Issuing autochanger "unload slot 1, drive 0" command.
> 3304 Issuing autochanger "load slot 2, drive 0" command.
> 3305 Autochanger "load slot 2, drive 0", status is OK.
> 3001 Mounted Volume: xxx
> 3001 Device "tl-01-1" (/dev/nst0) is already mounted with Volume "xxx"
> ----
Looks like a bug to me, unless you misconfigured something inthe
SD.conf. Post that autochangers configuration, and also mention the
version you're using, and we might have some advice for you!
Cheers,
Arno
> The parameters to the mtx-script in the example are:
>
> -----
>
> /dev/sg6 unload 1 /dev/nst0 0
>
> /dev/sg6 load 2 /dev/nst0 0
>
> ----
>
> so, I can't load tapes to drive two (Drive Index = 1)
>
> any hints?
>
> is this a bug in the mount-command?
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|