[Bacula-users] One Library LTO3 and LTO4 drives
2009-09-26 15:12:21
Hi,
I've been looking around for a while... and I haven't found anything to answer a question... I'm running bacula-3.0.1 x86_64. I have an HP MSL8096, which has two LTO3 drives in in and we just got a new LTO4 drive.
I'm getting an error when trying to use the new LTO4 drive with the LTO4 tapes... (trying to run label barcodes) Sending label command for Volume "GFZ452L4" Slot 46 ... 3301 Issuing autochanger "loaded? drive 2" command.
3302 Autochanger "loaded? drive 2", result: nothing loaded. 3304 Issuing autochanger "load slot 46, drive 2" command. 3992 Bad autochanger "load slot 46, drive 2": ERR=Child died from signal 15: Termination.
Results=Program killed by Bacula (timeout)
Currently my bacula-sd.conf looks like:
Autochanger { Name = Autochanger Device = lto3-1 Device = lto3-2 Device = lto4-3 Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg1 }
Device { Name = lto3-1 # Drive Index = 0 Media Type = LTO3 Archive Device = /dev/nst0 AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes }
Device { Name = lto3-2 # Drive Index = 1 Media Type = LTO3 Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes }
Device { Name = lto4-3 Drive Index = 2
Media Type = LTO4 Archive Device = /dev/nst2 AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes }
And my Storage definitions from the bacula-dir.conf:
# Definition of file storage device Storage { Name = MSL-LTO3 Address = <host> SDPort = 9103 Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3LT3Cgkiyj" Device = "Autochanger"
Media Type = LTO3 Autochanger = yes Maximum Concurrent Jobs = 20 }
Storage { Name = MSL-LTO4 Address = <host> SDPort = 9103 Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3LT3Cgkiyj"
Device = "Autochanger" Media Type = LTO4 Autochanger = yes Maximum Concurrent Jobs = 20 }
Is this the proper way to handle two different tape types? or is my error caused by my config or just an issue with the drive?
Thanks for any information, Mitch Anderson
------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] One Library LTO3 and LTO4 drives,
Mitch Anderson <=
|
|
|