On Thu, Sep 17, 2009 at 5:32 PM, Watson, Joe
<ISJOEWAT AT oklahomacounty DOT org> wrote:
> I think this got side tracked I know now why the status doesn't work on the 
> tape drive but only on the autochanger. However I am trying to trouble shoot 
> the tape drive because I cant get it working with bacula. I run the btape 
> test which errors out and looks like;
>
>        17-Sep 11:25 btape JobId 0: Error: block.c:568 Write error at 0:0 on
>        device "Ultrium 4-SCSI" (/dev/nst0). ERR=Input/output error.
>        17-Sep 11:25 btape JobId 0: Error: Error writing final EOF to tape.   
>   This Volume may not be readable. dev.c:1681 ioctl MTWEOF error on       
> "Ultrium 4-SCSI" (/dev/nst0). ERR=Input/output error.
>        btape: btape.c:827 Error writing block to device.
>
> When I run the status on the changer I show that in my case that the 1st slot 
> is empty where a tape was placed and slot 2 the other slot I placed a tape is 
> full and shows the tape barcode number. I can only assume the tape is in the 
> drive.
>

Can you post the output of

mt -f /dev/nst0 status

to get the status of the tape drive.

Also on this mailing list everyone bottom posts. Please try to do that
next time..

John

------------------------------------------------------------------------------
Come build with us! The BlackBerry&reg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9&#45;12, 2009. Register now&#33;
http://p.sf.net/sfu/devconf
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users