On Mon, Mar 30, 2009 at 11:30 AM, Sergio Belkin <sebelk AT gmail DOT com> wrote:
> 2009/3/30 John Drescher <drescherjm AT gmail DOT com>:
>>> When I try to mount a tape, it outputs (it doesn't happen with others tapes)
>>>
>>> block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "".
>>> Buffer discarded.
>>> 3902 Cannot mount Volume on Storage Device "LTO3" (/dev/nst0) because:
>>> Requested Volume "" on "LTO3" (/dev/nst0) is not a Bacula labeled
>>> Volume, because: ERR=block.c:275 Volume data error at 0:0! Wanted ID:
>>> "BB02", got "". Buffer discarded.
>>> 3905 Device "LTO3" (/dev/nst0) open but no Bacula volume is mounted.
>>> If this is not a blank tape, try unmounting and remounting the Volume.
>>>
>>> end of output
>>>
>>> What can i do?
>>>
>> Is this on an autochanger?
>
> No it's not
>
>  Did you try unmounting and remounting the Volume?
>
> Yes I did, but problems persits.
>

Was this tape new or have you used it for some time? Any chance it was
in the drive and accidentally rewound outside of bacula and then
bacula ran a job on the volume?

John

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users