> When I try to mount a tape, it outputs (it doesn't happen with others tapes)
>
> block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "".
> Buffer discarded.
> 3902 Cannot mount Volume on Storage Device "LTO3" (/dev/nst0) because:
> Requested Volume "" on "LTO3" (/dev/nst0) is not a Bacula labeled
> Volume, because: ERR=block.c:275 Volume data error at 0:0! Wanted ID:
> "BB02", got "". Buffer discarded.
> 3905 Device "LTO3" (/dev/nst0) open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
> end of output
>
> What can i do?
>
Is this on an autochanger? Did you try unmounting and remounting the Volume?

John

------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users