On Thu, Aug 7, 2008 at 3:13 PM, Nils Blanck-Wehde
<nils.blanck-wehde AT backofficeservice DOT biz> wrote:
> Hi John,
>
> I checked it, /dev/sg3 is the right device. I may have found something odd.
> I did a couple of load/unload operations with both mtx and mtx-changer and
> they worked well. I then tried to load an empty slot and got the following
> output:
> [root@company-Backupserver ~]# /usr/lib/bacula/mtx-changer /dev/sg3 load 1
> /dev/nst0 0
> Loading media from Storage Element 1 into drive 0...Source Element Address
> 256 is Empty
> The interesting thing is that the command did not terminate. I waited for
> about 6 minutes but nothing happened. After that I canceled the command
> (CTRL-C).
>
> Is this how it's supposed to be? If not then maybe it is something like this
> that makes bacula go crazy.
>
Does the same for me for an empty slot. Bacula should not pick an
empty slot though as long as you always do an update slots after
changinging tapes.

John

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users