Hi Folks,

this is what btape test just told me while testing my autochanger:

=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
3991 Bad autochanger command: /usr/lib/bacula/mtx-changer /dev/sg3 
loaded 1 /dev/nst0 0
3991 result="": ERR=Child died from signal 15: Termination
You must correct this error or the Autochanger will not work.

Running "/usr/lib/bacula/mtx-changer /dev/sg3 loaded 1 /dev/nst0 0" 
manually (even as user bacula) returns the correct loaded slot-number 1:

-bash-3.2$ /usr/lib/bacula/mtx-changer /dev/sg3 loaded 1 /dev/nst0 0
1

Is there a way to increase debugging so that I can find out why exactle 
so command terminated when run by btape.
Maybe someone who knows the code a bit could spread some light.

Thanks a lot,

Nils

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users