Tilman Schmidt wrote:
> Thomas Mueller schrieb:
>>
>>> What is the best way to get Bacula to unmount and eject the tape 
>>> when the job is complete then email me to change the tape?
>>
>> maybe the "Offline on unmount" directive is for you?
>>
>> http://www.bacula.org/en/dev-manual/Storage_Daemon_Configuratio.html#9485 
>>
>
> I would recommend against that option. It has some very strange
> effects which I found difficult to tame, like ejecting volumes
> only to request the same volume again immediately.
>
> Perhaps the "Faking an auto-changer" recipe in the Wiki at
>
> http://wiki.bacula.org/doku.php?id=sample_configs#faking_an_auto-changer_with_one_tape_drive
>  
>
>
> works better. I haven't found the time to try it yet.
>
> HTH
> T.
>
>   
Thanks for the replies guys, looks like a lot of work just to umount and 
eject a tape?

Keith

> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>   


-- 
Keith Sudbury
Netzen Solution Ltd
Suite 5, Piccadilly House, London Rd, Bath, BA1 6PL, UK
Mobile: +44 (0)7921464106
Tel: +44 (0)1225 588 588
Fax: +44 (0)1225 580 061


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users