---------- Forwarded message ----------
From: Alan Brown <ajb2 AT mssl.ucl.ac DOT uk>
Date: Wed, Jun 4, 2008 at 11:25 AM
Subject: Re: [Bacula-users] Problem with 'label barcodes'
To: Attila Fülöp <lichtscheu AT gesindel DOT org>
Cc: John Drescher <drescherjm AT gmail DOT com>, bacula-users
<Bacula-users AT lists.sourceforge DOT net>


On Wed, 4 Jun 2008, Attila Fülöp wrote:

> > Note: That with this format Slot 24 does not work with the default
> > mtx-changer script because of the " IMPORT/EXPORT" part after the slot
> > number.
>
> You can fix this quite simply. See my post on the devel list.
> http://marc.info/?l=bacula-devel&m=121086110516687&w=2

BE CAREFUL.

On some changers (EG HP MSL6000/Overland Neo4000), tapes loaded in from
the IMPORT/EXPORT slots lose their slot number when sitting in the drive.

mtx-changer then gets utterly confused about where a tape which was loaded
from slot 59/60 (in my case) can be unloaded to and things start breaking.

AB



-- 
John M. Drescher

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users