Re: [BackupPC-users] high load and stuck processes
2010-03-06 11:39:14
On Sat, Mar 6, 2010 at 1:07 AM, Eric Persson <eric AT persson DOT tm> wrote:
dan wrote:
> If you are using EXT3 or XFS then I suggest you use an external journal.
> get yourself a small SSD or a small 15RPM disk. You could use a regular
> disk if you like but the faster the better.
This would work with a fast usbstick as well? With quite good results I
expect, and not much problems if it wears out, and perhaps cheaper than
a ssd. Or could I put in 4 usbsticks and create a raidset from it, and
store the journal on there? ;) Perhaps stupid, but worth a shot. Depends
on what you're using the backupserver for i guess. SSD is probably more
reliable for a bigger shop.
USB is the weak spot here. You want something on SATA (or IDE, SCSI). You could certainly try it but USB is pretty weak on IO performance so I wouldn't know if it would help performance or not. Try to raid up a few sticks BUT make use you put them on different controllers. A modern USB flash drive will see a USB bus speedlimit if you put two devices on 1 bus.
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev _______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
|
|
|