Re: Amanda 2.5 and HP MSL 4048 Fibre channel
2007-07-20 09:35:06
With pleasure :)
cat /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: HSV200 Rev: 5100
Type: RAID ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: HSV200 Rev: 5100
Type: RAID ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: HP Model: Ultrium 3-SCSI Rev: M22W
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 02 Lun: 01
Vendor: HP Model: MSL G3 Series Rev: 5.30
Type: Medium Changer
Pavel Pragin wrote:
> Hello,
>
> Can you please post the contents of this file:
> /proc/scsi/scsi
>
> Thanks
> Pavel
>
>> Hello,
>> We just installed a HP MSL 4048 (Fiber Channel).
>>
>> I do not know how to configure amanda.conf because there is several sg
>> created by the library (it has 4 magazines).
>>
>> I suppose that :
>> tapedev "/dev/st0"
>>
>> But how about :
>> changerdev
>> changerfile
>> tpchanger
>>
>> In dmesg :
>>
>> qla2xxx 0000:07:01.0:
>> QLogic Fibre Channel HBA Driver: 8.01.07-k1
>> QLogic QLA2340 -
>> ISP2312: PCI-X (133 MHz) @ 0000:07:01.0 hdma-, host#=0, fw=3.03.20 IPX
>> Vendor: HP Model: HSV200 Rev: 5100
>> Type: RAID ANSI SCSI revision: 05
>> Vendor: HP Model: HSV200 Rev: 5100
>> Type: RAID ANSI SCSI revision: 05
>> Vendor: HP Model: Ultrium 3-SCSI Rev: M22W
>> Type: Sequential-Access ANSI SCSI revision: 03
>> Vendor: HP Model: MSL G3 Series Rev: 5.30
>> Type: Medium Changer ANSI SCSI revision: 05
>> scsi 0:0:0:0: Attached scsi generic sg0 type 12
>> scsi 0:0:1:0: Attached scsi generic sg1 type 12
>> scsi 0:0:2:0: Attached scsi generic sg2 type 1
>> scsi 0:0:2:1: Attached scsi generic sg3 type 8
>> st: Version 20050830, fixed bufsize 32768, s/g segs 256
>> st 0:0:2:0: Attached scsi tape st0
>>
>>
>>
>>
>
|
|
|