Hi Users,
I'm looking for some enlightenment about amreport.
Below is a snippet from the last dump run, and I'm particularly
confused by the 'no-dumpers' entries.
I've set inparallel to 12, but I don't understand why all 12 don't
get used simultaneously or am I misunderstanding below ?
On this subject how can more than one dumper run on a client ? Surely
only one copy of tar or dump or whatever can run at a time (presuming
only one disklist entry per client)
Really, and help understanding what Amanda is at here appreciated !
Thanks
---
AlanP
12 dumpers idle : no-dumpers
taper idle
network free kps: 1100000
holding space : 57220m (100.00%)
chunker0 busy : 0:00:00 ( 0.00%)
chunker1 busy : 0:00:00 ( 0.00%)
chunker2 busy : 0:00:00 ( 0.00%)
chunker3 busy : 0:00:00 ( 0.00%)
chunker4 busy : 0:00:00 ( 0.00%)
chunker5 busy : 0:00:00 ( 0.00%)
chunker6 busy : 0:00:00 ( 0.00%)
chunker7 busy : 0:00:00 ( 0.00%)
chunker8 busy : 0:00:00 ( 0.00%)
chunker9 busy : 0:00:00 ( 0.00%)
chunker10 busy : 0:00:00 ( 0.00%)
chunker11 busy : 0:00:00 ( 0.00%)
dumper0 busy : 0:25:04 ( 41.55%)
dumper1 busy : 0:02:49 ( 4.68%)
dumper2 busy : 0:01:12 ( 1.99%)
dumper3 busy : 0:13:01 ( 21.58%)
dumper4 busy : 0:20:31 ( 34.02%)
dumper5 busy : 0:03:30 ( 5.82%)
dumper6 busy : 0:05:30 ( 9.12%)
dumper7 busy : 0:25:02 ( 41.49%)
dumper8 busy : 0:17:31 ( 29.05%)
dumper9 busy : 0:25:01 ( 41.49%)
dumper10 busy : 0:20:06 ( 33.32%)
dumper11 busy : 0:22:31 ( 37.35%)
taper busy : 0:47:27 ( 78.65%)
0 dumpers busy : 0:35:37 ( 59.04%) no-dumpers: 0:27:23
( 76.87%)
not-idle: 0:08:14
( 23.13%)
1 dumper busy : 0:00:02 ( 0.06%) no-dumpers: 0:00:02
(100.00%)
2 dumpers busy : 0:00:00 ( 0.01%)
3 dumpers busy : 0:02:29 ( 4.14%) no-dumpers: 0:02:29
(100.00%)
4 dumpers busy : 0:02:00 ( 3.33%) no-dumpers: 0:02:00
(100.00%)
5 dumpers busy : 0:00:25 ( 0.70%) no-dumpers: 0:00:25
(100.00%)
6 dumpers busy : 0:02:34 ( 4.27%) no-dumpers: 0:02:34
(100.00%)
7 dumpers busy : 0:04:30 ( 7.47%) no-dumpers: 0:04:30
(100.00%)
8 dumpers busy : 0:07:30 ( 12.46%) no-dumpers: 0:07:30
(100.00%)
9 dumpers busy : 0:01:59 ( 3.31%) no-dumpers: 0:01:59
(100.00%)
10 dumpers busy : 0:00:03 ( 0.09%) client-constrained: 0:00:02
( 88.63%)
11 dumpers busy : 0:02:56 ( 4.89%) no-dumpers: 0:02:15
( 76.45%)
client-constrained: 0:00:40
( 23.09%)
12 dumpers busy : 0:00:00 ( 0.00%)
| 