Failed dumps with new amanda client
2006-06-19 19:55:39
Hi:
It's been many years since I needed help with Amanda, but I'm stuck on
this one. I've had a client+server and a client only box set up for
years, backing up no problem (running amanda-2.4.4). I switched from a
DLT4000 to a DLT7000 several months ago, as the former was wearing out and
I needed more space.
A colo customer requested that I backup his FreeBSD box, which was built
with only on file system, which is using around 8GB of space. I built and
installed amanda-2.4.5 without a hitch and amchecks look fine. However,
I've attempted full dumps 3 times using two different tapes (the last
time, I reconfigured and reinstalled amanda duplicating my other client's
config) and all have failed exactly like this:
These dumps were to tape FULL0.
*** A TAPE ERROR OCCURRED: [[writing file: short write]].
Some dumps may have been left in the holding disk.
Run amflush to flush them to tape.
The next tape Amanda expects to use is: FULL1.
FAILURE AND STRANGE DUMP SUMMARY:
main.heart /dev/da0s1a lev 0 FAILED ["data write: Broken pipe"]
main.heart /dev/da0s1a lev 0 FAILED [dump to tape failed]
main.heart /dev/da0s1a lev 0 FAILED [out of tape]
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 0:09
Run Time (hrs:min) 4:34
Dump Time (hrs:min) 4:00 4:00 0:00
Output Size (meg) 20978.4 20978.4 0.0
Original Size (meg) 38216.5 38216.5 0.0
Avg Compressed Size (%) 54.9 54.9 --
Filesystems Dumped 8 8 0
Avg Dump Rate (k/s) 1491.9 1491.9 --
Dump Time (hrs:min) 4:00 4:00 0:00
Output Size (meg) 20978.4 20978.4 0.0
Original Size (meg) 38216.5 38216.5 0.0
Avg Compressed Size (%) 54.9 54.9 --
Filesystems Dumped 8 8 0
Avg Dump Rate (k/s) 1491.9 1491.9 --
Tape Time (hrs:min) 4:00 4:00 0:00
Tape Size (meg) 20978.5 20978.5 0.0
Tape Used (%) 59.9 59.9 0.0
Filesystems Taped 8 8 0
Avg Tp Write Rate (k/s) 1491.8 1491.8 --
USAGE BY TAPE:
Label Time Size % Nb
FULL0 4:00 20978.5 59.9 8
?
FAILED AND STRANGE DUMP DETAILS:
/-- main.heart /dev/da0s1a lev 0 FAILED ["data write: Broken pipe"]
sendbackup: start [main.hearth.com:/dev/da0s1a level 0]
sendbackup: info BACKUP=/sbin/dump
sendbackup: info RECOVER_CMD=/usr/bin/gzip -dc |/sbin/restore -f... -
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
| DUMP: Date of this level 0 dump: Mon Jun 19 15:33:29 2006
| DUMP: Date of last level 0 dump: the epoch
| DUMP: Dumping /dev/da0s1a (/) to standard output
| DUMP: mapping (Pass I) [regular files]
| DUMP: mapping (Pass II) [directories]
| DUMP: estimated 8092024 tape blocks.
| DUMP: dumping (Pass III) [directories]
| DUMP: dumping (Pass IV) [regular files]
| DUMP: 12.34% done, finished in 0:35
| DUMP: 30.07% done, finished in 0:23
| DUMP: 45.62% done, finished in 0:17
| DUMP: 62.13% done, finished in 0:12
\--------
?
NOTES:
planner: Last full dump of ns1.pil.net:/dev/da0s1a on tape FULL0
overwritten on this run.
planner: Last full dump of ns1.pil.net:/dev/da0s1g on tape FULL0
overwritten on this run.
planner: Last full dump of ns1.pil.net:/dev/da0s1e on tape FULL0
overwritten on this run.
planner: Last full dump of ns1.pil.net:/dev/da0s1f on tape FULL0
overwritten on this run.
planner: Last full dump of mail.pil.net:/dev/aacd0s1a on tape FULL0
overwritten on this
run.
planner: Last full dump of mail.pil.net:/dev/aacd0s1g on tape FULL0
overwritten on this
run.
planner: Last full dump of mail.pil.net:/dev/aacd0s1e on tape FULL0
overwritten on this
run.
planner: Last full dump of mail.pil.net:/dev/aacd0s1f on tape FULL0
overwritten on this
run.
planner: Last full dump of main.hearth.com:/dev/da0s1a on tape
overwritten in 1 run.
taper: tape FULL0 kb 24499968 fm 9 writing file: short write
?
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- --------------------------------- ------------
mail.pil.net -v/aacd0s1a 0 117614 42944 36.5 0:361184.0 0:361183.7
mail.pil.net -v/aacd0s1e 0 2494624 865536 34.7 10:301373.8 10:301373.7
mail.pil.net -v/aacd0s1f 0 1808993 407328 22.5 6:421012.6 6:421012.5
mail.pil.net -v/aacd0s1g 0 160671519237184 57.5 95:261613.2 95:261613.2
main.hearth. /dev/da0s1a 0 FAILED ---------------------------------------
ns1.pil.net /dev/da0s1a 0 127749 74624 58.4 0:471579.3 0:471577.8
ns1.pil.net /dev/da0s1e 0 2505458 770528 30.8 18:29 694.7 18:29 694.7
ns1.pil.net /dev/da0s1f 0 700444 126752 18.1 3:11 663.6 3:11 663.6
ns1.pil.net /dev/da0s1g 0 153116939957120 65.0 104:181591.2 104:181591.2
(brought to you by Amanda version 2.4.4)
I'm using this tape type:
tapetype DLT7000
define tapetype DLT7000 {
comment "DEC/Quantum DLT7000 tape drive, hardware compression turned
off"
length 35000 mbytes
filemark 8 kbytes
speed 5 mbytes
}
TIA for any tips!
James Smallacombe PlantageNet, Inc. CEO and Janitor
up AT 3 DOT am http://3.am
=========================================================================
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Failed dumps with new amanda client,
up <=
|
|
|