Amanda-Users

Re: System Crash when using Amanda

2006-01-10 16:35:25
Subject: Re: System Crash when using Amanda
From: "Freels, James D." <freelsjd AT ornl DOT gov>
To: Michael Loftis <mloftis AT wgops DOT com>
Date: Tue, 10 Jan 2006 16:19:48 -0500
The problem I had started at kernels greater than 2.6.12.x (starting at 2.6.13.0) and was finally cleared at 2.6.15.0.

------------------------------
James D. Freels, Ph.D.
Oak Ridge National Laboratory
freelsjd AT ornl DOT gov
http://www.comsol.com/stories/hfir/


--- Begin Message ---
Subject: Re: System Crash when using Amanda
From: Michael Loftis <mloftis AT wgops DOT com>
To: amanda-users AT amanda DOT org
Date: Tue, 10 Jan 2006 14:01:39 -0700


--On January 10, 2006 3:43:56 PM -0500 "Freels, James D." <freelsjd AT ornl DOT gov> wrote:

Do you happen to be using the aic7xxx driver ? If so, I had the same
problem until the new kernel 2.6.15.


I'm having problems in debian 2.6.8 related to aic7xxx as well...I use an aic7xxx HVD SCSI connected to a tape library, occasionally since going to 2.6 it totally locks up one of the tape drives to the point i have to shutdown and re-init the drive (which in this case means power cycling the whole library) and then reboot the tape server.
--- End Message ---
<Prev in Thread] Current Thread [Next in Thread>