Hi again
If I run a Monthly config
#'sudo -u amanda crontab -e
# Backup check running amcheck at 4.30pm on the 2nd day of each and
every month.
30 16 2 1-12 * /usr/sbin/amcheck MonthlySet1
Thus use 12 DSS-4 DAT Tapes and set the Monthly amanda.conf as below
dumpcycle 4 weeks # the number of days in the normal dump cycle
runspercycle 1 # One run per month
tapecycle 12 tapes # the number of tapes in rotation 12 per Year.
Would these be better
On Tue, 2005-06-14 at 17:50 +0100, Chuck Amadi Systems Administrator
wrote:
> Hi Again
>
> Thus continue and labelling DailySet101 - 110 as So far, to Dailyset
> 122 Thus end of each month pull that tape and carry on as usual.
>
> Thus as I started the backup with tape DailySet102 for tuesday as I want
> DailySet101 for first week monday. Have I got to edit the tapelist
> accordingly.
>
> Do I just
>
>
>
> On Tue, 2005-06-14 at 10:24 -0400, Jon LaBadie wrote:
> > On Tue, Jun 14, 2005 at 02:03:19PM +0100, Chuck Amadi Systems Administrator
> > wrote:
> > > Hi Great
> > >
> > > Yes I am going to use 10 tapes in total and reuse the first tape after
> > > 10 week days worth of backups.
> > >
> > > Thus is it fine to pull the last Friday tape at the end of the Month for
> > > archiving and then re-label the tape I pulled.
> > >
> > >
> > > On Tue, 2005-06-14 at 08:21 -0400, Jon LaBadie wrote:
> > > > On Tue, Jun 14, 2005 at 12:45:07PM +0100, Chuck Amadi Systems
> > > > Administrator wrote:
> > > > > Hi I have 10 dat tapes that I will run per my cycle 5 per 5 day week.
> > > > > Thus every fortnight.
> > > > > I am correctly concluding I need only a tapecycle of 10 tapes
> > > > > I hope to pull out the last Friday tape in that Month to archive and
> > > > > thus label another tape to replace it.
> > > > >
> > > > > Here's my config file.
> > > > >
> > > > > dumpcycle 0 weeks # the number of days in the normal dump cycle
> > > > > runspercycle 1 # the number of amdump runs in dumpcycle days
> > > > > # (4 weeks * 5 amdump runs per week -- just
> > > > > weekdays)
> > > > > tapecycle 10 tapes # the number of tapes in rotation
> > > > > # 4 weeks (dumpcycle) times 5 tapes per week
> > > > > (just
> > > > > # the weekdays) plus a few to handle errors
> > > > > that
> > > > >
> > > >
> > > > Think of tapecycle as how many "different" tapes amanda must use
> > > > before it will reuse the first one. In your setup, it looks like
> > > > full backups every run, tapecycle is as critical as a setup doing
> > > > mixed full and incrementals. Set it to whatever you want, or are
> > > > comfortable, having amanda not overwrite before being allowed to
> > > > reuse. If you want the last 10 full dumps to be sure to be around,
> > > > then set it to 10. If the last 5 is comfortable, you can set it
> > > > to 5, but still use 10 tapes. Amanda will only check that at least
> > > > 5 are still the most recent.
> >
> >
> > I just want to make certain I'm not confusing
> > your intent because of terminology.
> >
> > You want to "pull" the monthly tape and
> > "relabel the tape you pulled".
> >
> > That second part (relabelling) is a different tape,
> > right? If so, it is not "relabelling" but just
> > an initial label for that tape.
> >
> > Now, if you mean to use the same label as the one
> > pulled, think twice. Amanda keeps indexes of what
> > is on a tape. If you use the same label as the
> > pulled tape, then you will soon lose the index
> > for the pulled tape (when the new tape is used).
> >
> > Instead, when you pull a tape, mark it a "no-reuse".
> > The index will be retained. But the new tape will
> > need to have a different label.
> >
> > In fact, you could label up 22 tapes, 10 for cycling,
> > 12 in anticipation of pulling monthly for a year.
> > Your tapecycle could be set to 10, and you could
> > cycle through your first 10, or all 22. Amanda will
> > still ensure that the most recently used 10 are not
> > overwritten. Monthly, just pull whichever of the
> > 22 was used. You will have a "hole" in your tape
> > cycle, but amanda won't care.
> >
> > But maybe the human (you) will :)) If so, set your
> > label scheme up to be something like DS-xx.y where
> > xx is your ordering sequence and y is which replac-
> > ment. Maybe you label up DS-01.0 to DS-10.0. At
> > the end of the month, say you have to "pull" DS-05.0
> > Mark it as no-reuse and label up a new DS-05.1. This
> > preserves your ordering and tells you it is a tape
> > not in the initial cycle. Might be important for
> > some tapes (eg. DAT) which have a fairly short life.
> >
> > Just some ideas.
> >
> > jl
> --
> Unix/ Linux Systems Administrator
> Chuck Amadi
> The Surgical Material Testing Laboratory (SMTL),
> Princess of Wales Hospital
> Coity Road
> Bridgend,
> United Kingdom, CF31 1RQ.
> Email chuck.smtl.co.uk
> Tel: +44 1656 752820
> Fax: +44 1656 752830
>
>
>
--
Unix/ Linux Systems Administrator
Chuck Amadi
The Surgical Material Testing Laboratory (SMTL),
Princess of Wales Hospital
Coity Road
Bridgend,
United Kingdom, CF31 1RQ.
Email chuck.smtl.co.uk
Tel: +44 1656 752820
Fax: +44 1656 752830
|
