Re: newb: getting started
2004-10-14 18:10:48
On Thu, Oct 14, 2004 at 04:25:01PM -0500, Erik Anderson wrote:
> On Tue, 12 Oct 2004 18:20:37 -0500, Frank Smith <fsmith AT hoovers DOT com>
> wrote:
> > Next step would be getting your changer working without Amanda. If you
> > are going to use mtx make sure you can load, unload and move tapes with
> > that before starting on Amanda.
>
> Hello Frank, and thanks for the advice. I'm working through the
> Amanda chapter, and it's starting to make more and more sense. In the
> meantime, I'm trying to get my head around mtx. I've been able to
> successfully load a tape and check the status of the media changer,
> but I'm not able to unload tapes. I read in the mtx man page that I
> may need to do a "mt offline" before unloading tapes, but whenever I
> do that, I get the following error:
>
> lpdlnx00 etc # mt -f /dev/sg2 offline
> /dev/sg2: Operation not permitted
>
> Here's what the changer currently looks like:
>
> lpdlnx00 etc # mtx -f /dev/sg1 status
> Storage Changer /dev/sg1:1 Drives, 6 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Storage Element 1 Loaded)
> Storage Element 1:Empty
> Storage Element 2:Full
> Storage Element 3:Full
> Storage Element 4:Full
> Storage Element 5:Full
> Storage Element 6:Full
>
> Any ideas? Thanks in advance!
My first guess is that the device you selected is not
correct for use with mt.
Try "mt -f /dev/??? status" with various devices
from the /dev directory.
It might not be sg... but st... or nst...
--
Jon H. LaBadie jon AT jgcomp DOT com
JG Computing
4455 Province Line Road (609) 252-0159
Princeton, NJ 08540-4322 (609) 683-7220 (fax)
|
|
|