Re: Label Printing?
2002-08-30 10:14:48
On Friday 30 August 2002 09:24, Alex Specogna wrote:
>I shall keep this brief.. has anybody on this list got the label
> printing in Amanda working? I don't seem to get ANY output at all
> when I define the lbl-templ directive in the tape type. Is there
> anything wrong with the following definition?
>
>define tapetype DLT {
> comment "DLT tape drives"
> lbl-templ "/usr/local/etc/amanda/Backup/DLT.ps"
> length 40000 mbytes
> filemark 2000 kbytes
> speed 1536 kbytes
>}
>
>
>I have tried running amreport to a file and e-mail and they both
> work. The print to postscript just does nothing runs merrily
> along and then terminates with no errors.
>
>Any advice would be greatly appreciated
>
>Thanks
I ran a label printer for a while, but its awful hard to read one
sized to fit in the DDS2 casette box, not to mention the paper
debris getting into the tapes wasn't such a great idea, so I
stopped.
But it seems to me I had to do something with the perms someplace,
like amanda didn't have access to the printer or something along
those lines. That was back in jurrasic times when I was using
LPRng, but now I've seen the light and use cups. In any event
today I'd set it up to use the 3-hole.ps and keep them in a 3 ring
binder rather than risk contaminating the tape by tossing a slip of
freshly cut to size paper in its container.
This admittedly is a difficult area to debug because the printer
manager in use will usually just delete the job without a trace
before you can get at it to see what went south, usually within
about a minute.
--
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz 512M
99.13% setiathome rank, not too shabby for a WV hillbilly
|
|
|