I have no idea...
try to run query vm * -vmrestoretype=instantrestore -detail
Efim
> 27 июля 2017 г., в 11:39, rouzen AT univ.haifa.ac DOT il <rouzen AT
> UNIV.HAIFA.AC DOT IL> написал(а):
>
> In did ..... despite of the virtual machine was created successfully with
> the process Full VM instant restore
>
> Regards Robert
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Efim
> Sent: Thursday, July 27, 2017 11:33 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523
>
> I correct understood that you try to instant restore VM and can't see the
> current restore process status in the Restore -> Instant Access/Restore
> Status?
> Efim
>
>> 27 июля 2017 г., в 11:14, rouzen AT univ.haifa.ac DOT il <rouzen AT
>> UNIV.HAIFA.AC DOT IL> написал(а):
>>
>> Hello Efim
>>
>> I run the process on another ESXi and no problem the machine was created
>> successfully.
>>
>> I will check with the VMware administrator the status of the iSCSI on
>> this specific EXSi
>>
>> By the way another question , after the process finished successfully I
>> check in the Instant Access/Restore Status windows but got " No data to
>> display"
>>
>> The new machine is power on and working ?
>>
>> I did the process with full vm Instant Access instead full vm instant
>> restore , and when finished successfully I check in Instant Access/Restore
>> Status and seethe machine waiting to be dismount.
>>
>> Best Regards Robert
>>
>> -----Original Message-----
>> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
>> Of Efim
>> Sent: Thursday, July 27, 2017 10:32 AM
>> To: ADSM-L AT VM.MARIST DOT EDU
>> Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523
>>
>> Hi,
>> did you configure iSCSI on ESXi and set VMISCSIServeraddress on datamover?
>> Efim
>>
>>
>>> 27 июля 2017 г., в 9:49, rouzen AT univ.haifa.ac DOT il <rouzen AT
>>> UNIV.HAIFA.AC DOT IL> написал(а):
>>>
>>> Hello All
>>>
>>> Tried the new feature on TSM for VE 8.1.0.1 in the Restore section called
>>> "Full VM Instant Restore" . Here what I got running this command.
>>>
>>> Error Or Warning Messages:
>>> • ERROR ANS2421E Cannot detect the iSCSI initiator.
>>> • ERROR ANS2411E Instant Restore/Access of virtual machine 'Test1'
>>> failed with rc = 6523 • ERROR ANS2421E (RC6523) Cannot detect the iSCSI
>>> initiator.
>>>
>>> I Check on my TSM server , the iSCSI initiator is ON , I can see the
>>> iqn id on the Configuration tab in the iSCSI properties
>>>
>>> I know I miss something but what ?.
>>>
>>> Any suggestion , tip what to look ?
>>>
>>> Best Regards Robert
|