ADSM-L

Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523

2017-07-27 04:34:05
Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523
From: Efim <aefim771 AT GMAIL DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 27 Jul 2017 11:32:39 +0300
I correct understood that you try to instant restore VM and can't see the 
current restore process status in the Restore -> Instant Access/Restore Status?
Efim

> 27 июля 2017 г., в 11:14, rouzen AT univ.haifa.ac DOT il <rouzen AT 
> UNIV.HAIFA.AC DOT IL> написал(а):
> 
> Hello Efim
> 
> I run the process on another ESXi and no problem the machine was created 
> successfully.
> 
> I will check with the VMware administrator the status of the iSCSI on this 
> specific EXSi
> 
> By the way another question , after the process finished successfully I check 
> in the Instant Access/Restore Status windows but got " No data to display"
> 
> The new machine is power on and working ?
> 
> I did the process with full vm Instant Access instead full vm instant restore 
> , and when finished successfully I check in Instant Access/Restore Status and 
> seethe machine
> waiting to be dismount.
> 
> Best Regards Robert
> 
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of Efim
> Sent: Thursday, July 27, 2017 10:32 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Full VM Instant Restore error ans2411e rc=6523
> 
> Hi,
> did you configure iSCSI on ESXi and set VMISCSIServeraddress on datamover?
> Efim
> 
> 
>> 27 июля 2017 г., в 9:49, rouzen AT univ.haifa.ac DOT il <rouzen AT 
>> UNIV.HAIFA.AC DOT IL> написал(а):
>> 
>> Hello All
>> 
>> Tried the new feature on TSM for VE 8.1.0.1  in the Restore section called 
>> "Full VM Instant Restore" . Here what I got running this command.
>> 
>> Error Or Warning Messages:
>> • ERROR ANS2421E Cannot detect the iSCSI initiator.
>> • ERROR ANS2411E Instant Restore/Access of virtual machine 'Test1' 
>> failed with rc = 6523 • ERROR ANS2421E (RC6523) Cannot detect the iSCSI 
>> initiator.
>> 
>> I Check on my TSM server  , the iSCSI initiator is ON , I can see the 
>> iqn id on the Configuration tab in the iSCSI properties
>> 
>> I know I miss something but what ?.
>> 
>> Any suggestion , tip what to look ?
>> 
>> Best Regards Robert


ADSM.ORG Privacy and Data Security by KimLaw, PLLC